No way to change any parameter of any device in Deco App with Deco M5 network
Hi,
I cannot change anymore device name, or priority network of the device, or using mesh or not, and so on. It keeps the change 1 sec. and revert back.
I tried to wipe date of the app, to deconnect/reconnect on my TPLINK account, on several devices, from different pages in the app, identify smart devices as suggested in a post here... No way !
Does anyone has a proposal ?
I have not yet delete the network and start from scratch because of the work it will provoke donstream.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
might consider updating from the firmware version you use (1.3.1) to the most current one (1.4.2).
the app description used to state that in order to properly use the app you need to ensure you have the latest firmware releases (or something to that end).
- Copy Link
- Report Inappropriate Content
Thanks for the reply. Surprisingly, or may be because I have hardware (EU) V1.0, Android App. et Web GUI only propose to me the actual version 1.3.1.
On TP-Link website support, hardware (EU) V1 looks several updates behing (US) V3 hardware : July 2019 vs January 2020.
- Copy Link
- Report Inappropriate Content
Hello, the 1.4.2 is the firmware released for those customers who had updated the 1.4.0 firmware, which fixed some minor bugs. Now the 1.3.1 is the latest one, and newer firmware will come soon.
Back to your issue, have you ever tried to reboot the Deco and your devices?
Try to connect the main Deco to the modem only with other satellite units off.
Besides, if it is still the same, please shot a short video and send it to us.
Thanks a lot.
- Copy Link
- Report Inappropriate Content
Of course I tried to reboot Decos, first from the App, later from the web GUI, the three of them.
I have just tried as you suggest to let connected only the router Deco with no better result.
I am afraid that I will have no option other than start again from scratch. I only hope the issue will not remain.
I skip the video step as the problem is simple : every change in any device parameters page will be visible 1 sec before coming back to previous value (name, high priority lever, and so on). The same in the Deco device page where you can change using mesh lever of any connected device in one page. Sometimes it writes a message such as (my version is in French) : "Impossible to save your settings. Please try later".
- Copy Link
- Report Inappropriate Content
does this mean that 1.3.1 is more "advanced" than 1.4.2? or was there a branch split and these two versions are now the same?
I am asking because you wrote : "Now the 1.3.1 is the latest one"
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1360
Replies: 5
Voters 0
No one has voted for it yet.