Archer C6 v2 EU firmware recovery
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello,
recently I failed with firmware update my Archer C6 v2 EU. After that, my router became soft bricked. So I tried to perform recovery using TFTP. I set static IP address 192.168.0.66 and renamed ArcherC6v2_eu-up-ver1-2-1-P1[20200110-rel60119].bin to ArcherC6v2_tp_recovery.bin. The router correctly got the file over TFTP, but after restart, router wont boot. Then I tried OpenWRT image and router correctly boot up. COul someone give me an info, how to give back original firmware?
Thanks
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@ingwar7
the support send me the 1.3.6 beta
- Copy Link
- Report Inappropriate Content
@ingwar7 i'm having the exact same problem right now.... Did you managed to upload the original firmware?
- Copy Link
- Report Inappropriate Content
@noseran I'm exactly in the same sutuation, I really need to rollback to original firmware.
Do you ever manage to revert to stock firmware ?
Thanks
- Copy Link
- Report Inappropriate Content
@kevpic https://forum.openwrt.org/t/archer-c6-v2-eu-bricked-bootloop/71803
- Copy Link
- Report Inappropriate Content
I am also experiencing this state and left
--------------------------------
- Copy Link
- Report Inappropriate Content
@noseran Thank you for your quick reply.
I follow your steps :
I'm stuck on this point :
added pad to the kernel file (the partition is 0x100000, so hex to dec, 1048576 bytes minus the size of kernel (wc -c < os-image) = #your own value# (so people don't lead into error))
cd firmware
dd if=/dev/zero bs=1 count=#your own value# >> os-image
I have browsed the tplink-safeloader but cannot find the size of os-image.
I have put 574 in "count" value because wc -c < os-image return 1048002.
I've tried to flash from openWRT interface but still the same.
Cannot boot in TPLINK firmware.
I'm able to flash openWRT again via TFTP but not this firmware...
I'm obviously missing something.
Thanks again for you help.
- Copy Link
- Report Inappropriate Content
OK, I've just done it again and it works like a charm.
I've probably gone too fast in the procedure.
Anyway thank you veery mush @noseran for your help !!
You save me lot of time !!
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 12224
Replies: 9
Voters 0
No one has voted for it yet.