Acessing my TL-WPS510U from my Mac in the wireless network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Acessing my TL-WPS510U from my Mac in the wireless network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Acessing my TL-WPS510U from my Mac in the wireless network
Acessing my TL-WPS510U from my Mac in the wireless network
2020-02-20 20:20:34 - last edited 2020-02-20 20:36:29
Model: TL-WPS510U  
Hardware Version: V7
Firmware Version: 9.08.58T 0008 (2017/06/29 14:38:43)

I have followed the instructions in FAQ 252 -- https://www.tp-link.com/se/support/faq/252/ -- (several times, in fact), and everything goes well until step 8:

 

"Try to access the TL-WPS510U"

 

I can see that the green network led is green, so it looks like I have succeeded to connect the device to my wireless network -- indeed, if I switch off my router, the green led on the print server goes out -- but how do I connect to the print server again to finish the set up? Neither of the IP addresses 192.168.0.10 or 192.168.1.10 work. (I've tried pinging as well.)

  0      
  0      
#1
Options
1 Reply
Re:Acessing my TL-WPS510U from my Mac in the wireless network
2020-03-03 03:29:46 - last edited 2020-03-06 00:28:12

@jophan 

Hi, if you can't log in to the printer server's management page after setting it up, please check the printer server's IP address settings, make sure the IP address is in the same subnet with your main router.

Please send us the printer server's IP address settings page and the computer's IP address page, and also tell us your router's IP address. Then we will check.

 

Have a nice day.

  0  
  0  
#4
Options