Home

Forums

Stories

Knowledge Base

Home Network Community > Wi-Fi Routers > Archer C7 AC 1750

< Wi-Fi Routers

Archer C7 AC 1750

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer C7 AC 1750

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer C7 AC 1750

Thomasvd

2020-01-06 22:54:50 - last edited 2020-01-06 22:56:21

Posts: 4

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2020-01-06

Archer C7 AC 1750

2020-01-06 22:54:50 - last edited 2020-01-06 22:56:21

Model: Archer C7

Hardware Version: V2

Firmware Version: 3.15.3 Build 180305 Rel.51282n

Hello Guys,

I'm having a problem with a device that needs a UDP timeout of min 180 sec.
I cannot find the UDP timeout option somewhere, so i suppose its not available.
What is the standard setting for thios udp timeout?

Because all the ports are forwarded, and it's still not working.
IF i test this with my own laptop and listen to the ports, i can see online that both TCP and UDP 53 and 8883 are open.
So it must be the udp timeout that is causing this problem
https://support.chamberlaingroup.com/s/article/Recommended-router-settings-for-the-MyQ-Wi-Fi-products-1484145723404

I did test this straight behind my modem with a public ip on the device without any port forwarding and it works.
It stops working when i put the device behind my Archer.

Regards,
Thomas

6 Reply

Kevin_Z

2020-01-07 02:44:25

Posts: 21755

Helpful: 5137

Solutions: 2565

Stories: 21

Registered: 2018-12-24

Re:Archer C7 AC 1750

2020-01-07 02:44:25

@Thomasvd

Hello Thomas,

Theoretically, it is not caused by the UDP timeout; we can do some troubleshooting first to locate this issue and try to fix it.

Have you enabled port forwarding for some specific device but no avail?

What is the current internet IP address of Archer C7?

In the same network, please test whether you can access it with this device's IP address and port number; meanwhile, you can use the WAN IP plus port number to test.

Besides, please use telnet to test:

1. in the same network, please go to run—cmd—telnet lan ip port number

2. in external network, please run—cmd—telnet wan ip port number

Note: Please show us the pictures of the test results.

Good day.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.

Thomasvd

LV1

2020-01-07 08:07:22 - last edited 2020-01-07 08:11:27

Posts: 4

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2020-01-06

Re:Archer C7 AC 1750

2020-01-07 08:07:22 - last edited 2020-01-07 08:11:27

@Kevin_Z

Dear Kevin,

Have you enabled port forwarding for some specific device but no avail? : Yes, port 53 and 8883 both on TCP and UDP for controlling a door.
Device: Chamberlain MyQ starterkit

What is the current internet IP address of Archer C7?

WAN: 109.129.131.143 (static, pingable)

LAN: 192.168.0.1

DHCP: yes

Device for port forwarding: 192.168.0.210

Ports to open TCP/UDP: 53, 8883

I will attach some screenshots and a movie of testing:

Movie: https://we.tl/t-ppDZwzIzmi

Open movie with VLC player or something ;)

Pictures: