TL-WPA4220 looses internet connectivity after few days of uptime
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I've been using the TL-WPA4220 device for a few weeks now and I noticed that every few days it loses connectivity to the internet. This is apparent in two ways:
- Any device that attaches to it wirelessly is unable to access the internet
- The web interface of the device cannot be accessed over the browser.
The solution to this is to unplug the adapter and plug it back in, after which it successfully establishes the connection and works properly for days until the same issue reoccurs.
As you may imagine, this gets very annoying. How to resolve this issue?
Some steps I tried so far:
- Setting the static IP address for device to obtain from the router (didn't work)
- Upgraded firmware with a proper version in the proper region (didn't work)
- Tested all devices in house to determine if they are the cause of this, didn't produce any change in behavior
- Setting up a continuous ping from each device (didn't work)
I would appreciate any other idea besides these as I am right now in front of a wall. My next resort is to simply claim device under warranty or ask for money return.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello everyone,
For WPA4220 unstable issue, you could try some suggestions here:
1. Try to reserve an IP address on router for devices connected to powerline unit, and see if that help with stability.
2. Turn off Power-saving mode on powerline devices：
https://www.tp-link.com/support/faq/2018/
3. If House Led goes off when issue happen, put powerline units into the same room and test stability
4. Ensure your WPA4220 firmware is up to date: (select Hardware according to the back label of device before download corresponding firmware )
Firmware for WPA4220: https://www.tp-link.com/support/download/tl-wpa4220/
(How to update the firmware of Powerline ac Extender via web-based management interface (new logo)? )https://www.tp-link.com/support/faq/1419/
If the above does not help, it is encouraged to create a new thread from here with the case details, please report back with some information below to help locate the issue:
1) may I know House Led/LED Status on both devices when AV600 drops connection?
If House Led is On when issue happens, please check the IPv4 address and gateway and send us a photo: https://www.tp-link.com/support/faq/838/
2) How often does the issue happen? How to recover the connection, like reboot router or powerline device.
3) When issue occurs, do not reboot but try to ping the default gateway and send us the ping results：https://www.tp-link.com/support/faq/425/
4) May I know your network topology?e.g Archer C7 <Ethernet>PA4010 downstaits ___<house powerline>WPA4220 upstairs.
Do you have a stable wired connection on the main router?
* I will be marking this post as the solution to this topic, in order for forum user to find some troubleshooting steps easily and to then provide additional feedback.
Best Regards.
- Copy Link
- Report Inappropriate Content
What is the light status of the TL-WPA4220KIT when the connection drops out? Please check the IP address and default gateway with your device connected to the powerline adapter.
Note: Here is the instruction:https://www.tp-link.com/support/faq/838/
At the same time, can you get internet from the main router by wired cable?
You can change another socket to plug the adapters and try to change another ethernet cable to connect the main adapter to the router.
Besides, you can locate them in the same room and verify whether it works stable as expected.
Any updates, please let us know.
Have a nice day.
- Copy Link
- Report Inappropriate Content
Hi,
i have the same Model: TL-WPA4220
Hardware Version: V4
Firmware Version: 4.0.3 Build 20190326 Rel.43406
And almost every day i need to unplug and restart the adapters.
what is interesting there is no firmware with this number/date on the official paget to download ?!?
Meaybe we shoud downgrade the firmware?
BR
- Copy Link
- Report Inappropriate Content
I am also having this issue with the TL-WPA4220Kit, the wireless module drops out, initially I can see it on the tpPLC app on my phone, when I notice an issue with a device supposedly connecting to the wireless extender, I have checked the app and it is not there, a restart of the extender seems to fix this. How do I find out what the firmware is on the extender, not sure if it needs to be updated. Note, trying to update via the App comes up with unable to connect to the firmware site, the wireless extender is connected via powerline to the lan version of the kit which in turn is connected to the router.
- Copy Link
- Report Inappropriate Content
@MK86 @Kevin_Z @clunker @RagDaz
Hi,
I have exactly the same problem. After a day (sometimes later, sometimes earlier) WiFi network disapears. The connection through ethernet cabel is still working. So it's something wrong with WiFi functionality I guess.
Have you found any solution, please or should I send back the device as not working?
Firmware version: 4.0.3 Build 20190326 Rel.43406
Hardware version: TL-WPA4220 v4.0
TP-LINK Team, could you be so kind and adise what should I do to use your product?
- Copy Link
- Report Inappropriate Content
@MK86 I got this device to watch TV in the front of the house as I got buffering with the main router, because I got disconnects when I mirrored the Main Router AP details I ended up creating a new AP this seems to have fixed the issue as it works fine with the TV. I did wonder if the original issue was IP conflict as my main network is DHCP and devices connect and disconnect as family members come home and leave, however I noticed that you tried a Static IP and it still did not work, however just a thought - whilst you used a Static IP could the IP already be allocated to another device?
- Copy Link
- Report Inappropriate Content
Anyone using firmware V4_190326 and experiencing the symptoms described in posts 1-5 above may want to consider downgrading to the previous firmware version. I downgraded from TL-WPA4220(EU)_V4_190326 to version TL-WPA4220(EU)_V4_180308 and it seems to have resolved all of these issues.
Initially I upgraded firmware to version TL-WPA4220(EU)_V4_190326 when the product was brand-new and until recently had only tested with that version. Every 6 or 7 days the device would become completely unresponsive and had to be power cycled to restore normal operation. It also became increasingly unstable in the days leading up to the 'crash' and frequently lost internet connectivity for a minute or two. Since downgrading I haven't noticed any problems after several weeks of up time.
- Copy Link
- Report Inappropriate Content
@MK86 I am having the exact same issues as everyone else, I have to restart the adapter every day as I lose all internet connectivity whether I am connected to it via cable or wireless.
I am going to try to downgrade the firmware as suggested, but where do you get the older firmware from? On the TP-Link site it only offers the latest version to download.
- Copy Link
- Report Inappropriate Content
kamakazi999 wrote
@MK86 I am having the exact same issues as everyone else, I have to restart the adapter every day as I lose all internet connectivity whether I am connected to it via cable or wireless.
I am going to try to downgrade the firmware as suggested, but where do you get the older firmware from? On the TP-Link site it only offers the latest version to download.
If you get a reply to your question can you post on here I am having same issue and it's driving me bonkers!! I had older version of this device and gave it away to a relative to help them with wifi issues round the house during this lockdown I ordered a new one and assumed I would get something stronger and more reliable!
- Copy Link
- Report Inappropriate Content
@kamakazi999 try this link to the polish site I downloaded the older version from there and installed it here's hoping it works!
https://www.tp-link.com/pl/support/download/tl-wpa4220kit/#Firmware
- Copy Link
- Report Inappropriate Content
@LennyK thanks for the link, will give it a go.
I have also been speaking to TP-Link support on chat and they are going to do some testing with the firmware and they did offer a RMA on the adapter, but I am not conviced that this is a hardware issue.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 4
Views: 18248
Replies: 43
Voters 2
