Deco M5 Signal Source
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I purchased the Deco M5 as a solution to poor wifi reception at certain areas of the house, esp the garage. The AP I have set up in the garage insists on connecting to the signal source furthest away instead of the one about 5 feet away from it. Kind of defeats the purpose of buying this setup. Any update on when signal source will be a selectable item?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@TP-Link Has this issue been resolved yet? I just bought a set of 3 and an extra one and I am finding that my slaves all connect to main unit even though there is a closer slave with full strength available. From what I have read in forums, this has been going on for some time. If there is no solution for these I will be returning mine right away. Bo chance I am playing musical chairs with turning some off an others on in a particular sequence for this to work as a mesh. This is ridiculous.
- Copy Link
- Report Inappropriate Content
I own 5 M5s and have nothing but regrets.
How manually being able to select a signal source wasn't thought to be a core feature is pure incompetence.
To anyone looking to buy this and is doing their research, do not buy. I can not recommend anyone to purchase a TP-Link product based on this experience. No matter how many Decos you buy, your entire house will be bound to the one main Deco. What a farce! TP Link should be ashamed of themselves for advertising their product in such a manner, knowing full well it fails to do what the people who are going to buy it are expecting.
- Copy Link
- Report Inappropriate Content
Hi, there is a firmware 1.6.0 (For Deco M5 only )available for trial and if you are interested, please have a check of your message box.
Thank you very much.
- Copy Link
- Report Inappropriate Content
@TP-Link hi - please could i get the link to the 1.6 version ? The signal source issue is driving me mad
- Copy Link
- Report Inappropriate Content
Hi, for anyone who is interested in the 1.6.0 beta firmware for Deco M5, please have a look at this link:
- Copy Link
- Report Inappropriate Content
Anyone had the chance to test this beta firmware?
- Copy Link
- Report Inappropriate Content
Hi,
I've just purchased the Dec M9 + set of 3. I have a TP Link Archer AX6000 as the main router, connected to a modem to fibre broadband to the internet. Although the Archer is a good product still getting issues with streaming audio to my network streamer which is 15 metres away as affected by neighbours' wifi mesh systems.
So decided to go for the Deco M9 set of 3. All Decos are on the same floor, the main deco is in the lounge, connected to the Archer router by ethernet cable, the second 5 metres away in the next room (one wall in between), the third 5 metres from the second (one wall in between).
Unfortunately, I have the same problem as many people are having - the third deco by the streamer is linking to the deco in the lounge (even though the signal is showing as very weak) instead of the one in the next room only 5 metres away. The signal strength of the Deco system in the room with the streamer is far weaker than the signal from the Archer router. I can't select which Deco the third Deco uses as it's source.
I'm really surprised and frustrated that the third deco is sourcing from the main one, furthest away (which actually shows on Deco's own app as having a very weak signal). I can't see the point of this system if it can't source from the nearest deco with the strongest signal. Is there any software update due to fix this for the M9 plus? If so when? I note as of today the app says I have the latest software. I need to know soon otherwise I can't return the product for a refund. Thanks.
- Copy Link
- Report Inappropriate Content
Hi, Currently, there is no beta firmware for Deco M9 plus to allow manual selection of signal source.
And it has been planned to be added to the firmware 1.6.0.
If you would like to spend a little time, I would like to forward your case to the senior engineers.
Please refer to this link and try to install the beta firmware on this link:
[Deco] Manual Signal Source Selection
If it is not working, please send an email to support.forum@tp-link.com with the following information:
1. a picture of your network topology about the location and distance of Deco units.
2. a screenshot of the signal source strength on the third Deco.
3. is there any specific problem caused by the wrong signal source, like slow speed, unstable connection?
Thank you very much.
- Copy Link
- Report Inappropriate Content
@TP-Link Please let us know when the M5 signal source selection will be released outside of Beta? I've tried to update my M5s via the web management to the pre-release 1.6 to be able to select the signal source but it just says Operation Failed...
Thank you.
- Copy Link
- Report Inappropriate Content
Is there also a beta firmware for deco P9 v2?
i just got mine today, and after setting them up, i came across this issue. My plan was to replace my current google wifi system with Deco P9 but considering this issue, Deco P9 will be useless for me and is not worth the replacement.
I was really excited to use them, but i might have to return them.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 3
Views: 12565
Replies: 40
Voters 3
