Model: TD-W8961N (EU)

Hardware version: v3.0

Firmware version: 3.0.0 Build 180118 Rel.05999

I bought it recently and noticed the following issue with the system log:

- If the ADSL connection is dropped (e.g. due to noise), but the device remains switched on, the log displays the entries after the link was re-established (e.g. "SNMP TRAP 3: link up") and the previous log entries disappear. It is therefore impossible to tell how many disconnects occurred during the past few hours.

Also, some additional visual improvements could be made to the log format:

- The displayed time e.g. "11:7:2" could be formatted as "11:07:02".

Edit: Just realised there was a newer firmware available (3.0.0 Build 180118 Rel.05999). I made the upgrade, but the behaviour seems to be the same.