Home Network Community > Range Extenders > RE200 Not working with any router
< Range Extenders

RE200 Not working with any router

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

RE200 Not working with any router

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
RE200 Not working with any router
RE200 Not working with any router
2019-12-10 21:36:08 - last edited 2019-12-26 16:01:59
Model: RE200  
Hardware Version: V2
Firmware Version: 1.1.6 Build 20180412 Rel. 31612

I bought a RE200 Ver 2.0 S/N 2187207003559 to extend my wifi signal to the back of my house.

 

I had no luck on making it work. I tried with my internet provider modem and thought maybe had something to do with it so I tried extending the signal from an Apple Airport Extreme Router but couldn't make it either.

 

I tried manually from the computer, and also from the cellphone app. Several times. Reseted it and re-try again. Also tried WPS with the internet provider modem. Nothing.

 

I get only 2 lights fully on the POWER and the WIFI. But neither 2.4ghz nor 5ghz light go on so obviously no internet is being extended.

 

I can connect via wifi to the RE200 but no internet is on.

 

If it helps, all tests have been made 20 cm away from primary router and had turned on/off everything several times.

 

So, is anything else I can try? Update firmware? I don't know what to do please I would appreciate any help on this so I can have internet at the back of my house.

 

Thanx!

M

 

UPDATE: I updated FIRMWARE TO 1.1.8 Build 20181113 Rel. 36494 but still the same issues going on and no internet.

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:RE200 Not working with any router-Solution
2019-12-26 16:01:51 - last edited 2019-12-26 16:01:59

I got my RE200 working finally after the kind help of a virtual assitance via Team Viewer

 

I post the resolution just in case anyone lands in this page:

 

2 things got the RE200 working, and both include modifying the main router settings:

 

1) Changing from 40MHZ to 20MHZ on the main router admin settings made it work, but we preferred leaving that in 40mhz so we switched it back

 

2) We selected chanel 6 on the main router, because the RE200 was trying to connect to that channel, and that made it work too, so this is the solution we chose, and afterwards I relocated the RE200 and everything went well

 

Thanks for the help!

AA

Recommended Solution
  0  
  0  
#15
Options
9 Reply
Re:RE200 Not working with any router
2019-12-11 06:02:29

@Mauma 

 

Hello, please ensure that you use the main router's wifi password to configure the RE200. And locate it 3 meters away from the main router to set it up. 

https://www.tp-link.com/support/download/re200/#video

https://www.tp-link.com/support/faq/1400/ 

 

Try to change the wireless settings of the main router to give it a go, including wireless network name and password. 

 

Still the same, please show us a screenshot of the status page and send us the system log.

Note: Go to web UI of RE200 and go to settings-system tools to save log and export it. 

 

Besides, please tell us the model number of the main router and its firmware version. 

 

Thanks in advance and have a nice day. 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:RE200 Not working with any router
2019-12-11 14:51:20 - last edited 2019-12-11 14:56:18

@Kevin_Z i've done everything on your reply and still the same. Evidently there's an issue because it doesn't connect to any router which are working fine and providing internet normally, but I cannot extend them with the RE200.

 

I attach the screens you requested and also the LOG file.

 

The routers I am trying are two

1) Apple Airport Extreme (don't know firmware) MODEL A1143

2) The internet provider router ZTE model ZXHN F660

 

Any ideas?

 

Thanx

M

 

File:
syslog-2018-01-01.logDownload
  0  
  0  
#4
Options
Re:RE200 Not working with any router
2019-12-16 17:34:40

 

 

 

 

 

ANY HELP ON THIS PLEASE ?! I PROVIDED ALL SCREENS AND NO ONE ELSE REPLIED....

 

 

 

 

Please I would appreciate help so as to make it work

 

 

  0  
  0  
#6
Options
Re:RE200 Not working with any router
2019-12-16 17:35:05
any help? I replied with screenshots and all
  0  
  0  
#7
Options
Re:RE200 Not working with any router
2019-12-17 01:44:09

@Mauma 

 

Thanks for your valued reply.

 

We have checked the screenshots and log attached but not able to locate this issue. Considering the extender failed to connect to the 2 different routers, we would like to follow up your case via email to do further analysis to fix it. 

 

Please check your inbox later. 

 

Best regards. 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#8
Options
Re:RE200 Not working with any router
2019-12-17 16:00:32

@Kevin_Z ok! I'll be waiting to see if we can solve it. Thanks!

  0  
  0  
#9
Options
Re:RE200 Not working with any router
2019-12-18 01:30:39

@Mauma 

 

Thanks for your reply and kindly support. 

 

Good day. 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#10
Options
Re:RE200 Not working with any router-Solution
2019-12-26 16:01:51 - last edited 2019-12-26 16:01:59

I got my RE200 working finally after the kind help of a virtual assitance via Team Viewer

 

I post the resolution just in case anyone lands in this page:

 

2 things got the RE200 working, and both include modifying the main router settings:

 

1) Changing from 40MHZ to 20MHZ on the main router admin settings made it work, but we preferred leaving that in 40mhz so we switched it back

 

2) We selected chanel 6 on the main router, because the RE200 was trying to connect to that channel, and that made it work too, so this is the solution we chose, and afterwards I relocated the RE200 and everything went well

 

Thanks for the help!

AA

Recommended Solution
  0  
  0  
#15
Options
Re:RE200 Not working with any router
2019-12-27 03:13:18

@Mauma 

 

Thanks for sharing it. Glad to hear that you figured it out with our engineer together. 

 

Now you can use the RE200 to boost the wifi signal. 

 

Any further problem, be free to let me know.

 

Good day. 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  1  
  1  
#16
Options

Information

Helpful: 0

Views: 1778

Replies: 9

Related Articles
RE200 Not Working
578 0
RE200 range extender not working
491 1
WiFi Range Extender RE200 not working.
1666 4
Re200 V1 access point not working
112 0
 Extender not working -RE200
380 0
 RE200 stoped working
260 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.