Deco sometimes connecting to the furthest other Deco instead of the nearest
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
As shown in the image, the red deco P7 sometimes, instead of connecting to the Deco P9, it connects to the other P7 that is further away! The black P7 is the "main" deco, the internet gateway, and is connected to the P9 with Ethernet backhaul. When the red P7 connects to the P9 the connection is much more stable and reaches even 200mbps of local speed (measured with iPerf). When instead the red P7 connects trough wi-fi to the other P7, the connection gets less stable and transfer speed drops to about 15/25 mbps. I want to notice that the two P7 connect trough Wi-Fi and not powerline because they are connected to two different electrical circuits.
The algorithm of network optimisation must be pretty dumb, or maybe it bugs because it wants to reduce to the minimum the number of hops, but doesn't consider that the decos are connected with Ethernet! I ABSOLUTELY NEED THE POSSIBILITY TO MANUALLY CHOOSE THE DECO TO WHOM MY P7 SHOULD CONNECT!
P7 connects to the furthest deco available
