Android TV won't connect to WIFI when MESH functionality is turned on
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I've created a new thread for this problem, I posted this a while back in a thread which was already flagged with a solution (which wasn't a solution, but ok ;) ) That probably means the thread won't get much attention.
Hello,
Fast update, I've updated to the newest firmware. (Deco M9 Plus1.3.0 Build 20190821 Rel. 54023) Which allows you to turn of Mesh Technology for connected devices. I'm sorry to say that my TV (Philips (55PUS6401/12) with Android 8.0.0) still won't connect to wifi when enabling fast roaming. My original problem still exists with this newest firmware.
2 Deco's connected via cables to a switch and that switch isconnected to a modem. Third Deco is on the first floor connected via WIFI.The TV is in a room about 4 meters (12 feet) from the Deco which is connected via cable to the switch.
Steps done:
- Fast roaming turned off. This is how I have to use my network now.
- Turned mesh technology off for my TV (around 22:00 (or 10 pm)
- Until now everything works fine and all devices are able to connect to my Deco's
- Turned on Fast Roaming
- TV loses wifi connection and other devices still work
- I can't get the tv to connect, not via the main WIFI or Guest network and WPS doesn't work either.
So while I think this newest firmware has a lot of great features, it still doesn't let me use fast roaming. Which is actually the reason I bought de Deco's.
I hope this information helps and if you have any questions let me know!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Kevin_Z Why not update the software to allow us to not send 802.11/r to selected devices. This is what Synology offers in their mesh UI to solve for this problem and it works great.
- Copy Link
- Report Inappropriate Content
As of this week fast roaming works with my TV. My TV hasn't had an update for more than a year, so I'm assuming something within the Deco Firmware changed for the better.
I have 3 Deco M9 Plus at home and I noticed my RING doorbell would often connect to the Deco unit which is farthest away. No clue why, but the doorbell (battery build in) doesn't have the option to reconnect. So I tried to turn on fast roaming this week and I forgot to turn it off after the doorbell connected to the closest Deco.
Today I realized that my TV has been connected to the WIFI which it wouldn't do before with fast roaming enabled. So it looks like all my devices work now with fast roaming enabled.
I'm hoping this is permanent :)
Deco M9 Plus - Firmware 1.5.1 Build 20210126 Rel. 62679
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 20200
Replies: 32
Voters 1
