Home Network Community > Range Extenders > RE450 OneMesh ETA?
< Range Extenders

RE450 OneMesh ETA?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
123

RE450 OneMesh ETA?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
RE450 OneMesh ETA?
RE450 OneMesh ETA?
2019-11-10 07:26:34 - last edited 2021-07-27 10:36:41
Model: RE450  
Hardware Version: V3
Firmware Version: RE450(EU)_V3_190124

Hi TP-Link!

 

Do you have an ETA for the OneMesh support of RE450?
 

Thanks,

Dph

 

  0      
 
  0      
 
#1
Options
24 Reply
Re:RE450 OneMesh ETA?
2019-11-11 07:31:35 - last edited 2019-12-21 13:59:09

@Dolphy 

 

Hello, the RE450 has included on the Onemesh compatibility list, so there will be a firmware released in the future which supports onemesh feature.

https://www.tp-link.com/onemesh/compatibility/

 

It is strongly recommmended to keep an eye on official website and wait for the updates. 

 

Wish your kindly understanding. 

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:RE450 OneMesh ETA?
2019-11-25 18:12:34
Is there a better way of subscribing fw updates like a mailing list? I keep checking the website, but still nothing while other (cheaper) devices already got support for OneMesh. While I encourage you to take your time for stabilizing your software, I'm getting a little impatient at the same time. Can we expect the update this year?
  0  
  0  
#4
Options
Re:RE450 OneMesh ETA?
2019-11-26 06:51:33

@Dolphy 

 

Thanks for your reply. 

 

As you know, a new feature will be added start from the new products first, and then it will be added to more products gradually. And to release a new firmware, round and round tests need to be done to ensure its performance. 

 

We are sorry to tell you that there is no ETA yet, it is suggested to keep an eye on official website for more updates. 

 

Wish your kindly understanding. 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#5
Options
Re:RE450 OneMesh ETA?
2019-12-06 09:43:29 - last edited 2019-12-06 09:43:43

Hi, As I can see now RE450 has been removed from OneMesh compatibility list. This is not what was promised previously. That was one of the reasons why I've chosen this (very expensive) repeater. Are you kidding me? 

  0  
  0  
#6
Options
Re:RE450 OneMesh ETA?
2019-12-06 16:15:34 - last edited 2021-07-27 10:36:41

@Dolphy 

 

THIS IS A TOTAL MOCKERY!!!

 

I HAVE BOUGHT RE450 V3 FOR THE SAME REASON (ONEMESH).

 

BUT IT SEEMS TPLINK TREATS THE CLIENTS WITH LIES!!!!!!

 

WE SHOULD BE ELIGIBLE TO GET OUR MONEY BACK FOR SUCH TREATMENT!!!!!!!!!!!!!!!

  4  
  4  
#7
Options
Re:RE450 OneMesh ETA?
2019-12-30 19:40:23

@Dolphy 

 

I hope that is just a mistake and not common practice to promise something under false promises and then break it.

  0  
  0  
#8
Options
Re:RE450 OneMesh ETA?
2019-12-31 02:31:41

Hi all,

 

We are sorry for the inconvenience caused here. 

 

There are some adjustments occured over the whole onemesh system, The plan to support Onemesh over RE450 has been postponed, considering it won't be released in the short run, to avoid potential loss, it has been withdrawn from the compatibility list. You can order the extender which supports onemesh already to build up the mesh system; And if you have bought RE450 and need this feature, you can return it and get another unit, like RE300, RE205 which supports Onemesh already.

 

Thanks for your kindly understanding and support again.

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#9
Options
Re:RE450 OneMesh ETA?
2020-01-03 19:59:10

Hi @Kevin_Z ,

 

I have two questions here,

 

RE455 V1 seems to replace the RE450 V3 OneMesh FW now I think, you have any estimated date for the RE455 availability?

 

 

You say that the date for firmware with OneMesh support for the RE450 V3 has been postponed not canceled, so its expected to be compatible with OneMesh in the future?

 

Thanks

  0  
  0  
#10
Options
Re:RE450 OneMesh ETA?
2020-01-05 11:59:37 - last edited 2020-01-05 12:03:07

Hello dears! I have RE450 V1. RE450(EU)_V1_171215.

My home setup is an ISP provided router (Huawei) and two REs RE450 and RE 650. It is still a continuous struggle for me when roaming around 1st and 2nd floor, always losing connection and not reconnecting properly. Especially problematic was RE450, always you can see Unknown WiFi clients with 255.255.255.255 address with no real workaround it.

 

I started considering mesh options.

Surprisingly I found TP Link One Mesh web page saying RE450V3 and RE650 will get One Mesh support. Now it seems like RE450 (espesially V1) will not get it (seems like it is really a troublesome device). However on the Russian support page I found a new firmware for RE450 - RE450(EU)_V1_191209. However when trying to install it - it says Wrong check sum and stops the process. I did not find this link on US support site. Latest for RE450 V1 is still RE450(EU)_V1_171215. And US support site does not list RE450V3 - only V1 and V2. Seems like TP Link is splitting those two... RE450 V1 and V2 and RE455 V1 which seems to be a replacement for RE450 V3.

Any comments here?

 

And I need an advise here... Should I wait for RE650 One Mesh support and buy Archer A7 (v?) to switch to Mesh? which in fact means I will have to throw out my RE450 ? At the time of purchase it was around 90 EUR.

Or should I throw out everything I have now (both RE450 and RE650) and go completely new setup like EERO or similar?

 

Thanks a million!

  0  
  0  
#11
Options
Re:RE450 OneMesh ETA?
2020-01-05 20:36:18
Hard to say anything about TP-Link plans based on the bad experiences related to this device. I don't want to be rude, because I really appreciate responsiveness of support people here, but anything which you can find on tp-link's website today is possibly subject to change tomorrow. You should only buy something which currently supports your requirements and don't believe anything "planned". ...or forget about TP-Link entirely like I do.
  0  
  0  
#12
Options
123

Information

Helpful: 0

Views: 14912

Replies: 24

Related Articles
Does RE450 support onemesh?
2863 0
Is RE-450 OneMesh ?
1000 0
RE450 v3 no longer OneMesh
7953 5
 RE450 OneMesh
496 2
RE450 V3 or RE455 V1 OneMesh
1966 0
 RE450 One Mesh Compatibility
4866 3
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.