RE305 not connecting to 5GHz network
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello all,
I've bought extender RE305 from TP-Link. I am trying to set up the repeater correctly, but for some reason it does not want to connect to 5 GHz network of my main router. It connects to 2,4 GHz without problems. This seems to be same problem as here: https://community.tp-link.com/en/home/forum/topic/166856 (as Ziggo is another name of UnityMedia).
Yesterday, I've noticed that for a few minutes, the LED for 5 GHz was on and that repeater managed to connect for a short amount of time, but then once again it disconnected and now 5GHz connection is once again marked as "out of signal".
My laptop, with Intel WiFi, is connecting normally to that network and connection is working and stable.
My main router is from UPC (UnityMedia), its a ConnectBox standard router.
Some info regarding its firmware:
Standard specification compliant : DOCSIS 3.0
Hardware version : 5.01
Software version : CH7465LG-NCIP-6.12.18.25-2p6-NOSH
Currently, 5GHz Wi-Fi is configured like that:
I tried to change channels, even set them to Automatic or even disable 2,4 GHz at all, but nothing helps.
What is seen by TP-Link:
What can I do to fix that issue?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
What's the hardware version of your RE305? It's on the lable, like Ver 3.
It's suggeted to update the firmware on RE305, check this: RE305 firmware
- Copy Link
- Report Inappropriate Content
@Kevin_Z Hi, i asked for a beta firmware, can you please sent me for the 2nd time? Thanks.
- Copy Link
- Report Inappropriate Content
suffering with the same problem but its RE305 V1....so is there any beta firmware for V1 RE305 extender? very disapointed with the purchase.. no wonder it was cheap.. just cant handle a strong 5ghz wifi. and 2.4ghz speed is too damn low. iam having 200mbps internet and has to use this extender at 12mbps. the speed with 5ghz is good but connection drops a 1000 times a day... and shows no signal when the extender is just around 5 or 6 metres away from the router. it reconnects when rebooted and then within next 10min it drops again and now forced to use 2.4ghz with 12mbps speed. such a waste purchase.
router is a huawei fibre device.
anyway let me know if the same beta firmware works in this older RE305 V1.
- Copy Link
- Report Inappropriate Content
Could someone help me as well I have the same problem, it seems that the TP device is not able to connect to a channel upper a certain value, I have read that some people has ask their providers to take the channel to like 40 or 36 (on the routers/modems that we are not able to do it).
Can you help me I have seen there is a BETA test that has been shared, could you share that with me?
Please let me know if not I'll try to call my provider as well.
Regards
- Copy Link
- Report Inappropriate Content
@Kevin_Z Please your help as well to get the BETA solution that has been mention
this is the version I have
- Copy Link
- Report Inappropriate Content
@ScorpioMx ya I hav been experimenting with 5ghz channels... It works sometimes but since the router here is managed by landlord I can't do more experiments to get perfect channel that works..
But for your case I believe u hav to login to your router WiFi setting and try assigning particular channel instead of setting auto. . And test which one stays stable with tp link..
- Copy Link
- Report Inappropriate Content
hello kevin i bought my extender months ago. Until now i started reseraching why it doesnt connect or even appear my 5g network.
can you help with this. This is the product I have
- Copy Link
- Report Inappropriate Content
Identical problem, latest firmware and 5G is grey here also.
Please help me with the problem! Like download link...
- Copy Link
- Report Inappropriate Content
Hello，
In order to better locate the issue, please help me to confirm the following information:
1. What is the model number of your router? Please send me a photo of the back label of your router.
2. Did you try to change a different channel of your router?
3. What is the model number and hardware version of your product?
Have a nice day!
- Copy Link
- Report Inappropriate Content
Hello,
May I know the model number of your TPLINK product? And also the hardware version of it, you can check it at the bottom label of the product.
What is the specific problem of your range extender?
Thank you for your cooperation and have a nice day!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 12775
Replies: 44
Voters 0
No one has voted for it yet.