Deco M4 slow speed
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello all!
I have installed 2 deco M4 units. I have a 500Mbps connection. When I plug the ethernet cable that feeds my main M4 node (that comes from the router) directly to a laptop I can get 499Mbps, but when I connect to the main M4 node with an ethernet cable I only get 160 Mbps, is this normal? Also wifi connection with the laptop (AC1200) near the main M4 node I can't get more than 150Mbps on 5Ghz, is this normal too? The firmware is the latest...
Thanks
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
The Deco M4 has the gigabit ethernet port, compared the bandwidth and actual speed, we can do some troubleshooting first and try to fix it.
What is the current network diagram?
With your device connected to modem and main Deco by wired cable directly, please click here to check the wired negotiation speed.
Note: The steps are the same, while you need right click on local area connection or ethernet connection.
Try to swap the locations of the 2 Deco M4 and verify whether it works. To configure slave Deco as main Deco, you can refer to : https://www.tp-link.com/support/faq/2400/
Try to change DNS server under advanced>>IPv4>>Internet connection type and uncheck obtain DNS automatically and change the primary DNS to 8.8.8.8 and click save.
And try to disable fast roaming and set QoS as standard and clear all the high priority rules.
After that, please run the speed test again and check whether it work.
Have a great day.
- Copy Link
- Report Inappropriate Content
Hello
My main deco is connected directly to a port on my router via ethernet cable. Connecting that cable direcly to my pc ethernet adapter I get 499Mbps. Connecting that cable coming from my router to port1 on main deco and my pc ethernet adapter to port2 on main deco I get 280Mbs (so almost half lost).
Wireless speeds:
Samsung Galaxy A50 connected wiressely near main deco: connection speed 433Mbps on android info tab, I get Wifi speed 180Mbps.
Change DNS and same results.
Best Regards
- Copy Link
- Report Inappropriate Content
With PC -- main Deco--router connected by wired cable, please click here to check the wired negotiation speed of the PC.
Note: Steps are the same, while you need click on ethernet connection.
Try to swap the locations of the 2 Deco M4 and verify whether it works.
Besides, you can change another ethernet ports on both router and Main Deco to connect them together.
Good day.
- Copy Link
- Report Inappropriate Content
@JFil is your NIC card capable of such speeds?
- Copy Link
- Report Inappropriate Content
The same is happening to me. If I connect either wirelessly or wired, I get half the speed I get when connecting directly to my modem.
Tried setting up bandwidth in QoS, setting my device with high priority, etc. but nothing seems to work. Keep in mind you can't choose a QoS profile in M4, you just get device QoS
- Copy Link
- Report Inappropriate Content
Has anyone had any luck solving this issue?
- Copy Link
- Report Inappropriate Content
@JFil I also experience this issue. Full speed (300Mbps+) directly connected to Virgin Super Hub v3 in modem mode. QoS switched off for all devices.
Half speed (if that) when connected to wired ethernet through Deco M4 (yes my device has Gigabit LAN). Will try suggestion of swapping Deco units (https://www.tp-link.com/uk/support/faq/2400/) round (thought they were all identical) to see if that helps and report back.
- Copy Link
- Report Inappropriate Content
@Andy_H any luck?
- Copy Link
- Report Inappropriate Content
Remember to check the Deco M4 setting under the QOS option. There is a spot to enter the total bandwidth up/down.
- Copy Link
- Report Inappropriate Content
Exact same problem here! I think it's disapointing buying something to improve your internet and then get half of your speed.
I'm surprised that other people have this issue?
Did anyone have any luck trying to solve this???
- Copy Link
- Report Inappropriate Content
Information
Helpful: 13
Views: 85527
Replies: 89
Voters 4
