Home

Forums

Stories

Knowledge Base

Home Network Community > Wi-Fi Routers > Archer C58HP randomly change to RE

< Wi-Fi Routers

Archer C58HP randomly change to RE

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer C58HP randomly change to RE

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Chaplin

2019-10-16 04:45:14 - last edited 2019-10-16 04:51:07

Posts: 4

Helpful: 28

Solutions: 0

Stories: 0

Registered: 2019-10-11

Archer C58HP randomly change to RE

2019-10-16 04:45:14 - last edited 2019-10-16 04:51:07

Model: Archer C58HP

Hardware Version: V1

Firmware Version: 1.0.1 Build 20180717 Rel 74530(UN)

Hi! how are you?

I am having a issue from several months.

First of all, the router is connected to a Cisco DPC3825 (Repeater)

Everything works correctly until, randomly, my router reboots.

When my router finishes restarting:

- RE light BLINKING

- WAN light OFF

- LAN light ON

- Wireless lights ON

When this happens, it forces me to do a factory reset, then it starts normally and i can restore my router backup.

I think i cant access router when this issue happen, so i cant see the log history.

Unfortunately, hazard perception test nsw it always happens to me when I am in a hurry or doing something that forces me to resolve the error quickly and not be able to stop looking for the cause.

The next time it happens I will try to access the router again to try to see the log.

Anyway, did this happen to someone? Is it a known error? Can it be something particular about the configuration?

Sorry is my english is not good, i speak spanish.

3 Reply

Kevin_Z

2019-10-16 06:43:54

Posts: 21573

Helpful: 5034

Solutions: 2542

Stories: 21

Registered: 2018-12-24

Re:Archer C58HP randomly change to RE

2019-10-16 06:43:54

@Chaplin

Hello, thanks for your requesting. We do not receive such feedback yet, but we will do some troubleshooting to locate this issue and try to fix it.

First, what is the current network diagram? How do you connect these devices together?

Have you pressed the RE button which is located on the top panel of the router. Press and hold it for about 3 seconds will change to the Range Extender mode.

After it switches to RE mode, try to access the web UI and go to settings-system tools-system log and save it, export it to us.

Besides, to separate the influence of the configuration file, you can hard reset it and then try to configure it manually, do not store the config file and take some time to test the performance.

Good day.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.

Skverma

LV1

2019-11-16 08:32:11

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2019-11-16

Re:Archer C58HP randomly change to RE

2019-11-16 08:32:11

@Kevin_Z

Kevin_Z wrote

@Chaplin

Hello, thanks for your requesting. We do not receive such feedback yet, but we will do some troubleshooting to locate this issue and try to fix it.

First, what is the current network diagram? How do you connect these devices together?

Have you pressed the RE button which is located on the top panel of the router. Press and hold it for about 3 seconds will change to the Range Extender mode.

After it switches to RE mode, try to access the web UI and go to settings-system tools-system log and save it, export it to us.

Besides, to separate the influence of the configuration file, you can hard reset it and then try to configure it manually, do not store the config file and take some time to test the performance.

Good day.

I also have some issue with my recently purchased C58HP. Normally it is configured to router mode but some times when I could not access internet, I found that LED for RE is blinking. I gone to router page and found that mode is changed to Repeater. This happened 4 times.

Pls suggest what is the reason.

Gui

LV1

2020-08-17 01:32:09

Posts: 3

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2018-12-23

Re:Archer C58HP randomly change to RE

2020-08-17 01:32:09

@Chaplin Same thing happens to me. any solutions?

Archer C58HP randomly change to RE

Archer C58HP randomly change to RE

Information

Voters 0

Tags