Home

Forums

Stories

Knowledge Base

Home Network Community > Wi-Fi Routers > C5400 not giving Gigabit Speeds

< Wi-Fi Routers

C5400 not giving Gigabit Speeds

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

C5400 not giving Gigabit Speeds

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

DN-GA-TDT

2019-10-07 01:09:03

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2019-10-07

C5400 not giving Gigabit Speeds

2019-10-07 01:09:03

Model: Archer C5400

Hardware Version: V2

Firmware Version: 1.2.2

I've been trying to fix it for 2 months to no avail. I can not get Gigabit on hardwired connection. I have gotten Wifi up to ~700Mb which is more than enough.

I know the modem is passing through gigabit. I have tried balancing out the QOS, I have tried enabling NAT Boost (Which 'should' disable QOS) but still the issue is showing.

When I run a Speedtest it will either start at 100, and build up to ~400 then 'finish'. Or it will start at 500 and drop until it reaches 200 then 'finish'.

Is there anything else I can try, or disable? I have reached out to support but I received a person who genuinely didn't want to help and just offered to RMA it - I never received an RMA notice or the new router.

2 Reply

ArcherC8

LV5

2019-10-07 12:04:53

Posts: 2098

Helpful: 833

Solutions: 49

Stories: 0

Registered: 2018-11-05

Re:C5400 not giving Gigabit Speeds

2019-10-07 12:04:53

Try replacing the Ethernet cables with new quality ones. Also, if you can, try a different PC for testing to see if you get the same results as your computer hardware/driver may be the issue. If bypassing the router by connecting the PC to the modem gets you the speed you are paying for, then do the RMA.

Kevin_Z

2019-10-08 07:05:46

Posts: 21546

Helpful: 5005

Solutions: 2536

Stories: 21

Registered: 2018-12-24

Re:C5400 not giving Gigabit Speeds

2019-10-08 07:05:46

@DN-GA-TDT

Hello, so you cannot get gigabit wired connection from the Archer C5400, but the wifi speed can up to around 700Mbps.

Please click here to check the wired negotiation speed when you connect to the C5400 directly.

Try to change another ethernet cable with better quality, like cat5e or above.

Besides, try to connect the computer to the modem directly to run a speed test.

Good day.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.

C5400 not giving Gigabit Speeds

C5400 not giving Gigabit Speeds

Information

Voters 0

Tags