Home Network Community > Deco > Lower speed when LAN ports in M9 are used
< Deco

Lower speed when LAN ports in M9 are used

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Lower speed when LAN ports in M9 are used

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Lower speed when LAN ports in M9 are used
Lower speed when LAN ports in M9 are used
2019-09-19 09:51:37
Model: Deco M9 Plus  
Hardware Version: V2
Firmware Version: 1.2.8 20190403 Rel. 43515

Good morning, I have a very strange problem which also, to my opinion, is related to a previous thread of me.

I have four M9 deco's in use, one being the main deco connected to the ISP router of Ziggo which is in bridge modus.

One other deco is connected via a cable, other two are connected wireless. Speed of the two wireless deco's is around 120 on one and around 220 on the other (ISP speed is 250) which is fine. BUT if a connect a device via a LAN cable to one of those deco's the speed drops to 10 consistently. Device is a Sonos speaker on one and a TV on the other. How come? 

 

The behavior is the same on my main deco (previous thread) where speed drops regularly. On the LAN port of this deco besides the ISP uplink a LAN cable is connected to a switch that connects to the rest of the house and cabled devices (NAS via cable, other deco via cable, TV, Sonos etc.).

 

Please help because this is not why I bought the M9 system.

 

Regards, Gerben

  0      
 
  0      
 
#1
Options
7 Reply
Re:Lower speed when LAN ports in M9 are used
2019-09-20 08:36:55

@Gerben 

 

Please draw a picture of the current network diagram. How do you connect these devices together? 

 

What is the model number of switch? With ISP router--main Deco--PC, please run a speed test and show us the results. 

 

In the meantime, please connect PC--slave Deco--main Deco--ISP router and test the wired speed you can get from the slave Deco directly. 

 

Please click here to check the wired negotiation speed; the steps are the same, but to click ethernet connection or local area connection. 

 

Besides, try to swap the locations of the Deco units and change another ethernet cable.

 

And please disable fast roaming and setup QoS as standard, clear all the high priority rules.

 

Good day. 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:Lower speed when LAN ports in M9 are used
2019-09-20 11:27:31

@Kevin_Z 

 

Hi Kevin, thanks. Please find attached the drawing. Switch is TP Link, model TL SG108.

Unfortunately i have no PC with fixed ethernet connection at hand (only Macbook pro) to further test via wired connections. All is wireless.

Fast roaming has been disabled all time.


Regards, Gerben

 

 

File:
20190920_132321.jpgDownload
  0  
  0  
#3
Options
Re:Lower speed when LAN ports in M9 are used
2019-12-23 17:46:52

@Gerben 

 

Was this issue ever resolved?


Thank you.

  0  
  0  
#4
Options
Re:Lower speed when LAN ports in M9 are used
2019-12-24 01:38:19

@eightball51 

 

Hello, do you have the same issue? Please provide more information. 

 

The model number of your Deco, the detailed description of the current issue and the troubleshooting you have done. 

 

Good day. 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#5
Options
Re:Lower speed when LAN ports in M9 are used
2019-12-24 16:22:53

@Kevin_Z 

 

Hi Kevin,


I have the Deco M9.  I have three units set up as below.

 

Fios Gigabit connection ONT----> Deco M9 #1----> Network Switch--(Ethernet)-->Deco M9 # 2 --(Ethernet)-->Vizio SmartTv

                                                                         -----> (WiFi) --->Deco M9 #3

 

Speeds in to Deco #1 are around 800 mbps. Wifi connections to #1 show in the low to mid 300 mbps. Deco #3 gets in the mid 200's.

 

The # 2 Deco is furthest away from main and when connect to wifi I get around 130 down/ 70 up mbps.  I have an ethernet cat 6 cable running from the #1 deco to the room that the # 2 M9 is located. When I connect that to the #3 Deco my speeds appear throttled for for wifi and ethernet connection from unit # 3 at around 95 mbps. 

 

I have tried all QOS settings, including setting the bandwidth manually to 1024. I have tried several different ethernet connections out of the #3 unit as well. 

 

Please assist. Thank you 

  0  
  0  
#6
Options
Re:Lower speed when LAN ports in M9 are used
2019-12-24 17:32:28

@eightball51 

 

Hi. Unfortunately i never got further answers.

After the recent update my experience is that speed, stability and coverage have improved. 

 

Regards Gerben 

  0  
  0  
#7
Options
Re:Lower speed when LAN ports in M9 are used
2020-01-03 16:17:25

@Kevin_Z 

 

Hello,

Can you please advise further on this? It is beginning to effect streaming in that area of the home.

 

Thank you

  0  
  0  
#8
Options

Information

Helpful: 0

Views: 1382

Replies: 7

Related Articles
Deco M9 Used as Ethernet Bridge
2543 0
 Deco M9 - Lan ports can't provide full 1Gbit speed... only 500mbit
391 2
 Why might my Deco M9 be giving out 50% lower speed than it is getting?
425 0
2 * LAN/WAN Gigabit Ethernet Ports
1568 0
M9 (2 puck) vs M5 (3 puck) making a difference at lower speeds?
858 0
 Deco M9 Plus slow LAN speed - help me please
8547 1
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.