M5 one disc setup only ethernet works
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I just finished setting up the first disc and active with ethernet plugged in. I remove and setup in the other room, yellow then red light. Plug in erhernet and works.
How do I make the first disc work via wifi?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
The Deco units can connect to each other by wired cable or wireless to builb up a mesh wifi system; While the first Deco, the main one need connect to the internet source/modem directly with ethernet cable.
Good day.
- Copy Link
- Report Inappropriate Content
The first one must be connected to ethernet? I was wanting them all wifi. Didn't see the point of having the first one only 3 feet from the modem.
- Copy Link
- Report Inappropriate Content
The Deco M5 can connect to each other by wired cable or wireless, to make it work, we need connect one of them ( the main one) to the internet source/modem, but it does not support WDS feature itself, therefore, we have to connect it to the modem by ethernet cable.
And the Deco is a wireless router, usually it works with a modem together to share internet; if the modem is a pure modem, the Deco will be the DHCP server and make clients access internet; otherwise, it can be a second router or access point.
Wish I make myself clear.
- Copy Link
- Report Inappropriate Content
Thank you I understand but pretty dissappointed one disc is wasted having to be in the same room as the modem/router.
Really should have the option of being completely wireless. I would only need 2 discs.
- Copy Link
- Report Inappropriate Content
The mesh feature leads that the Deco need connect to each other by wired cable or wirelessly, and the main Deco need connect to the modem/internet source by wired cable to get internet first.
If you have 2 Deco units and 1 existing router, you can connect one of the Deco to the modem as the main router and setup the 2nd one; for the old router, you can connect it to the Deco network to extend the wifi range.
Good day.
- Copy Link
- Report Inappropriate Content
The modem is the wireless router? I don't know any internet company giving you a modem thats a wireless router too....
- Copy Link
- Report Inappropriate Content
@CaboInterneTV What Kevin said is:
1st deco connect to isp's modem.
After complete setup 1st, conect 2nd deco to the 1st (main deco).
The old router (exp: archer c7) can connect to above deco system to extend wifi.
Nowadays ISP can give you modem with 2.4Ghz/5Ghz wifi (exp G97RG6M ).
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
What wif nack into the modem/router that its wired too???
What your explaining doesn't apply to standard modem/routers given to you by the cable company. I dont know of any internet provider that sends you a modem that isn't a wireless router in 2019. My modem is the wireless router. So, to 90% of the consumers the first disc is useless. It should have the option to be wireless or wire all the discs you decide to wire(including the first) You aren't gaining anything or losing anything with the first disc wired. I dont think it improves the wifi signal to the next disc same as the modem/router would have.
My review of the system & my customers from my electronics store. AND something to think about for the future....
This was a purchase to review the deco system to sell in my store.
- Copy Link
- Report Inappropriate Content
Back to the Deco M5 itself, the main usage of the Deco unit is to builb up a whole home mesh wifi system;
The Deco supports regular wireless router mode and access point mode; the main Deco need connect to the main router/modem to get internet first, other Decos can connect to each other by wired cable or wireless.
The first disc is important, to create the mesh network, it need and have to connect to the internet source by ethernet cable; Besides, the Deco does not support WDS feature, we cannot connect it to other device by wireless.
If you want to boost the wifi range but not require the mesh network, you may consider the normal network expansion device, like range extender and powerline adapters.
May it help and have a good day.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1477
Replies: 10
Voters 0
No one has voted for it yet.