Home

Forums

Stories

Knowledge Base

Home Network Community > Deco > Use the second lan port as output on main deco? (Deco m9)

< Deco

Use the second lan port as output on main deco? (Deco m9)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Use the second lan port as output on main deco? (Deco m9)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Jasper_rrr

2019-08-28 11:16:34 - last edited 2019-08-29 01:48:57

Posts: 2

Helpful: 0

Solutions: 1

Stories: 0

Registered: 2019-08-28

Use the second lan port as output on main deco? (Deco m9)

2019-08-28 11:16:34 - last edited 2019-08-29 01:48:57

Model: Deco M9 Plus

Hardware Version: V1

Firmware Version: 1.2.8 Build 20190403

I just installed our Deco m9s, the main being next to the tv. My plan was to run an ethernet cable to the main deco and then run an ethernet cable from the spare port on the deco to the tv as it needs an ethernet connection. However when I do this the tv gets no connenction.

So i am wondering if you are able to use the spare lan port on the main deco as output? If not what could be some solutions?

Modem > Deco Main > TV box

Thanks in advance.

1 Accepted Solution

Jasper_rrr

LV1

2019-08-28 16:25:33 - last edited 2019-08-29 01:48:57

Posts: 2

Helpful: 0

Solutions: 1

Stories: 0

Registered: 2019-08-28

Re:Re:Use the second lan port as output on main deco? (Deco m9)-Solution

2019-08-28 16:25:33 - last edited 2019-08-29 01:48:57

Ik fixed IT. Just needed tot disconnect the tv box from power.

Recommended Solution

Kevin_Z

2019-08-29 01:48:10

Posts: 21570

Helpful: 5032

Solutions: 2542

Stories: 21

Registered: 2018-12-24

Re:Re:Re:Use the second lan port as output on main deco? (Deco m9)

2019-08-29 01:48:10

@Jasper_rrr

Thanks for your reply, glad to hear that it works well now.

The spare ethernet port on the Deco can be used as output port. Please be assured about it.

If need more help in the future, do not hesitate to contact us.

Have a good day.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.

Sevy

LV1

2020-10-02 20:56:00

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2020-10-02

Re:Re:Re:Use the second lan port as output on main deco? (Deco m9)

2020-10-02 20:56:00

@Kevin_Z

is it possible to use the second port of the main deco as ethernet backhaul to another deco AND to connect another device (TV), using a switch, i.e., this configuration:

Modem -- ethernet -- Deco Main -- ethernet Switch -- TV

-- Deco slave

so the switch would allow to connect both a TV and a deco slave to the single remaining port of the Main Deco (since its first port is connected to the modem).

Thank you.

Use the second lan port as output on main deco? (Deco m9)

Use the second lan port as output on main deco? (Deco m9)

Information

Voters 0

Tags