Archer T4E giving extremely low speeds
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hey Guys,
did i get a malfunctioning Archer T4E?
my internet is 100Mbps, and i have the latest driver version installed.
I am getting VERY low speeds when using the Archer T4E:
- Using the T4E on 2.4hz i get ~25Mb/s (ping 9 and ~3ms to gateway)
- Using the T4# on 5Ghz i get ~3Mb/s (ping 9 and ~4ms to gateway)
- For benchmarking - Using an old TL-WN822n i get ~80Mb/s (ping 9 and ~3ms to gateway) (same exact location as the PCI-E antenna)
isn't the new + PCI-E model supposed to be much better than a 10y old usb adapter?
Signal also looks very nice on the PCI, better than the USB
netsh for USB
C:\Users\yaniv>netsh wlan show interface
Name : Wi-Fi
Description : Realtek RTL8192CU Wireless LAN 802.11n USB 2.0 Network Adapter
GUID : <redacted>
Physical address : <redacted>
State : connected
SSID : Error
BSSID : <redacted>
Network type : Infrastructure
Radio type : 802.11n
Authentication : WPA2-Personal
Cipher : CCMP
Connection mode : Profile
Channel : 5
Receive rate (Mbps) : 300
Transmit rate (Mbps) : 130
Signal : 73%
Profile : <redacted>
netsh for PCI
C:\Users\yaniv>netsh wlan show interface
Name : Wi-Fi 2
Description : TP-Link Wireless PCI Express Adapter
GUID : <redacted>
Physical address : <redacted>
State : connected
SSID : Error
BSSID : <redacted>
Network type : Infrastructure
Radio type : 802.11n
Authentication : WPA2-Personal
Cipher : CCMP
Connection mode : Auto Connect
Channel : 5
Receive rate (Mbps) : 144.4
Transmit rate (Mbps) : 144.4
Signal : 96%
Profile : <redacted>
