TP-LINK TL-WPA8630P KIT max 100mbit on ethernet.
Okay, so today I bought the TP-LINK TL-WPA8630P KIT, but the ethernet only goes up to 100mbit on my PC, where I'm sure it is capable of 1gbps. So I was wondering (since it comes with a CAT6 cable) why it is so slow.
Cheers,
Kevin Boon
The Netherlands.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
May I know who is your internet service provider and what is the bandwidth you pay for them?
With yoru PC connected to the TL-WPA8630Pkit, please click here to verify the wired negotiation speed.
Note: The steps are the same, while you need right click on local area connection or ethernet connection.
Besides, please connect your computer to the main router directly, bypass the TL-WPA8630PKIT to verify the wired speed.
Below is an instruction you can refer to:
https://www.tp-link.com/support/faq/2231/
Best regards.
- Copy Link
- Report Inappropriate Content
My internet provider is Ziggo, and I pay for 500mbit download and 40mbit up, and with wifi that had always been the case. Also, when I connect my pc directly with the router via a Cat5e cable, it has somewhere in between 400 and 500 mbit.
I already have taken all of these steps, but thanks for your advice!
Best regards.
- Copy Link
- Report Inappropriate Content
Thanks for your reply.
In my opinion, the TL-WPA8630Pkit should work well cause the wireless speed from the powerline adapter is normal.
To locate the issue and figure it out, with your laptop connected to the TL-WPA8630PKIT by wired cable, please run a speed test for 3 times and show us the results.
In the meantime, please verify the wired negotiation speed as the instruction mentioned on my last reply.
Besides, try to change another ethernet port on the adpater to plug the laptop or try to hard reset the powerline adapter and repair them to give it a go.
Please ensure that the firmware is up to date as well.
Good day.
- Copy Link
- Report Inappropriate Content
Thanks a lot for your help, but I've already decided that I'm going to send it back, it is too much of a hassle for something I already can almost achieve with wifi, but thanks a lot for helping me fix the issue.
Have a good day
- Copy Link
- Report Inappropriate Content
Thanks for your reply, I totally understand your decision.
Sorry for the inconvenience caused here, and thanks for your cooperation to do the troubleshooting with us.
Wish we have an opportunity to work with you regarding to some TP-Link device in the future.
Have a good day.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1368
Replies: 5
Voters 0
No one has voted for it yet.