help setup as router
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello
i have the following configuration:
ISP Router --> DECO M5 ---> TPLINK SWITCH -----> DECO M4R
-----> DECO M4R
i wish to use DECO M5 has a modem, but i want to keep network with 192.168.1.x
i can setup my ISP Router has bridge.
how can i setup the DECO M5 to be settuped like this?
thanks
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Do you want to setup ISP router as bridge mode and Deco M5 as main router, and keep the network with 192.168.1.x?
If so, you can change the LAN IP of the Deco M5 to 192.168.1.1, which is 192.168.68.1 by default.
How to change LAN IP: https://www.tp-link.com/support/faq/2331/
- Copy Link
- Report Inappropriate Content
thanks a lot ! will try it
- Copy Link
- Report Inappropriate Content
ps - do i need to change the IP of my ISP router?
btw: can in router mode manage CoAP messages?
thanks
- Copy Link
- Report Inappropriate Content
First, please ensure that there is no IP conflict between the ISP router and Deco.
Then, do you mean whether you can manage the Deco units in AP mode together?
If so, the answer will be yes, we can add multiple Deco units into the same network, and we can use the Deco app to manage them.
- Copy Link
- Report Inappropriate Content
hello
thanks you for the support,
my status is the following:
ISP Router - 192.168.1.254
it has then the IPs managed by it from 192.168.1.1 to 192.168.1.254
i want to :
setup my ISP router has bridge
shoud i define the ISP Router has 192.168.1.1 for example and then on its range from 192.168.1.1 to 192.168.1.2 and on DECO IP 192.168.1.3 > 254?
coap question is different, my decos are handling COAP messages but my ISP router does not support it apparently
- Copy Link
- Report Inappropriate Content
So the LAN IP of the ISP router is 192.168.1.254 and you want to set it up as bridge mode; meanwhile, you still want to setup DHCP pool as 192.168.1.1-291.168.1.253?
If so, cause the LAN IP of Deco is 192.168.68.1 by default, if you want to use 192.168.1.1-192.168.1.253 as the DHCP range, you can change the LAN IP of the Deco to 192.168.1.254; while to avoid IP conflict, we need change the LAN IP of the ISP router to another subnet, like 192.168.0.1.
Note: The DHCP server won't work in bridge mode. So the Deco will work as the DHCP server.
While for the coAP message issue, you mentioned that the Deco can handle it, so that should be fine; any further problem about it?
- Copy Link
- Report Inappropriate Content
ok i will try then and give back feedback
- Copy Link
- Report Inappropriate Content
Definitely sure.
Wish you make it work.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2689
Replies: 8
Voters 0
No one has voted for it yet.