Archer C6 2.4G band stops working, disable then enable restores
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Recently purchased Archer C6 Router running the latest firmware. On 4 occasions the 2.4G WiFi band has stopped working, devices can connect to it but get no network access. Disabling and enabling the 2.4G band on the admin interface restores the connectivity, the 5G band is not affected, a device connected to it is used to reset the 2.4G band.
I used the chat support service to discuss the issue and the suggestion was to change from automatic to a fixed channel for the 2.4G band, this appeared to resolve the issue but it has happened again today, a phone which only works on 2.4G was showing the WIFI as access denied.
is there anything else I can do to resolve this issue.
StuartP
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Yesterday, I installed different network analysis tools and noticed that my ISP's modem and the TP-Link Archer C4000 V1 (Archer A20 v1.0) router shared many channels.
In result, I performed the following modifications, and so far, things seem to be working well (already for months):
- Changed channel width from auto to 20 MHz.
- Changed channel from auto to 1.
- Set up the Reboot schedule to every week.
If something will still malfunction, I will consider adjusting the Version, Encryption and Mode, but for now, I will leave them with the default settings.
Alternatively, I will give a call to my ISP to modify some of the modem's settings, since I do not have the access to its control panel.
- Copy Link
- Report Inappropriate Content
Great finding, that's why we suggest you run a Wi-Fi analyzer to check out whether there are too much interferences in the network. I hope this will help fix the disconnect issue in your network.
- Copy Link
- Report Inappropriate Content
The new official firmware which optimizes the wireless performance will be available soon, so you can try the beta version we provided here to check if the issue is fixed. We do receive some customer's feedback that the issue was fixed with the beta firmware by disabling the Onemesh feature on the Archer C6. So give it a try if you still keep your Archer C6.
- Copy Link
- Report Inappropriate Content
@Kevin_Z Which is that beta firmware? As far as I know disabling OneMesh feature is not available with this version.
- Copy Link
- Report Inappropriate Content
You can find it on the first page of this thread, which is marked as a Recommended Solution (#549).
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
The problem is that the (EU) version has less flash memory than the (US) version and fewer features such as making correction and adding new functions if the flash memory is smaller.
- Copy Link
- Report Inappropriate Content
Lucasm wrote
The problem is that the (EU) version has less flash memory than the (US) version and fewer features such as making correction and adding new functions if the flash memory is smaller.
@Lucasm
If that would be the case, then alternative firmwares like OpenWrt would have the same problem, which they don't. It is clearly their inability to trace the bug in encryption, while rushing to add unnecessary mesh functionality. They probably just abandoned the issue, since it has several years of lifetime now, and it is cheaper for them just to move on.
- Copy Link
- Report Inappropriate Content
@vikiP my C6 is in the recycle bin months ago. Every firm was worse than before.
- Copy Link
- Report Inappropriate Content
@vikiP Your are right. never ever again.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 5
Views: 122520
Replies: 580
Voters 3
