Home Network Community > Deco > LAN IP changes after every reboot
< Deco

LAN IP changes after every reboot

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

LAN IP changes after every reboot

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
LAN IP changes after every reboot
LAN IP changes after every reboot
2019-07-16 22:45:20
Model: Deco M5  
Hardware Version:
Firmware Version: 1.3.1 Build 20190617 Rel. 47476

My LAN IP is changing after every reboot, from 192.168.0.1 to something else. I have my WAN DNS set to a local address within the LAN IP subnet, and I lose my internet connection on every reboot. It is a huge hassle each time it happens.

 

Is there a fix for this?

 

Thanks!

  1      
 
  1      
 
#1
Options
4 Reply
Re:LAN IP changes after every reboot
2019-07-17 01:38:22

@eeiciap 

 

In general, if the WAN DNS or WAN IP is in the same network segment as the LAN IP, it will cause the IP conflict. 

 

So it is recommended to change the WAN DNS and make it not in the same network segment as the LAN IP.

 

Click here to change WAN DNS:

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:Re:LAN IP changes after every reboot
2019-07-17 01:48:32 - last edited 2019-07-17 01:48:46

@Kevin_Z 

 

On the US community forum, a TP-Link representative mentioned that a firmware fix will be released soon to solve this issue.

https://community.tp-link.com/us/home/forum/topic/164792

 

Can you confirm that a future firmware will fix this issue? I'm using a local device as DNS to block ads, and I rather not use Deco to keep this functionality, rather than change my WAN DNS.

  0  
  0  
#3
Options
Re:Re:Re:LAN IP changes after every reboot
2019-07-17 01:57:20

@eeiciap 

 

Yep, there will be a firmware released soon to solve this issue. 

 

If you have a DNS server in the LAN, you can set the LAN DNS to the DNS server in the Deco app.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#4
Options
Re:Re:Re:LAN IP changes after every reboot
2019-09-30 05:14:38

@Kevin_Z 

 

Hi, this doesn't seem to be fixed in the latest 1.3.6 firmware. Is a fix still incoming?

  0  
  0  
#5
Options

Information

Helpful: 1

Views: 2542

Replies: 4

Related Articles
LAN IP has been changing every reboot
5605 0
Deco X60 LAN IP Changes After Reboot
1244 0
A8 V1 1.12 forgets lan ip every reboot
834 0
"LAN IP" setting changes randomly
787 0
[Deco M5] Manually configure LAN IP resets on reboot
2703 0
LAN IP Changed after firmware update.
1234 1
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.