Hairpin NAT on VR400 and VR600
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I'm looking to replace my ISP's DSL router as I need something with hairpin NAT (aka. NAT loopback). I have my eye on the Archer VR400 and VR600. I've seen threads mentioning hairpin NAT on a few other models. Could anyone confirm that the VR400 or VR600 support haipin NAT? I don't want to end up in a no refunds situation with some retailer.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hello
I have buy the TP-Link Archer VR400 router
I read my manaul and cannot find that support NAT loopback
PLS Can you help me how to activate NAT Loopback?
Thx Robert
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hello, do VR300 support NAT loopback? I currently have problem with it.
I have xx.tplinkdns.com/ DDNS.
I have port forwarding setup.
I can reach from inside LAN with IP 192.168.1.101 to my local server.
I can reach from outside of the LAN with DDNS
From inside LAN, I cannot reach with DDNS. As far as I understand, modem should NAT hairpin to make it work. Is this possible with VR300? Otherwise I would try same thing with VR400?
Somewhere on internet, I saw all TP-Link modems support NAT hairpining.
- Copy Link
- Report Inappropriate Content
I contacted Turkish TP-Link Live chat, responsible guy didn't know anythign about NAT hairpin.
I wrote here and didn't get any reply. (yet)
AS I stated before, somewhere on internet, I saw all TP-Link modems support NAT hairpining. (opensimulator page)
I bought VR300 and it didn't support it. I returned it.
I bought VR400. I liked that modem a lot more. Much better interface and much more capabilities.
I set up IPs and port forwarding. I tried to my ddns adrress from local network and viola it worked!
I am writing this so that other users that landed this page like me can buy VR400 with confidence for NAT Hairpin capability.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Kevin_Z Googleing endlessly only finds TP Link Router owners asking how to enable NAT Loopback and TP Link reps saying it's already enabled by default. NAT Loopback clearly doesn't work on these Routers, at least not straight out of the box. I have a brand new VR400 with the most recent firmware and NAT Loopback does not work. I need a work around or a fix urgently.
Kevin_Z wrote
- Copy Link
- Report Inappropriate Content
@e_g_loco Is your VR400 running the most recent firmware, is NAT loopback still working? I have a static IP so I'm not using the DDNS feature and NAT loopback is not working for me.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 3313
Replies: 9
Voters 1
