TL-WR1043ND bandwidth limited to 1mbps
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-WR1043ND bandwidth limited to 1mbps
Region : UnitedKingdom
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version :
ISP :
Hi,
I am using the TP-LINK TL-WR1043ND and I have update the firmware with TL-WR1043ND_v1_130428 firmware found on
http://www.tplink.com/en/support/download/?model=TL-WR1043ND&version=V1
website.
The problem I face is that the bandwidth (both wired and wireless) is just 1Mbit per second (1mbps) with UDP traffic, and 35-37mbps with TCP traffic.
I have tried changing the cat5e cable but again I face the same problem. I have used several softwares to check the bandwidth, like iPerf, and the results are the same. I factory reset the router but the problem remains the same. I have checked with a previous router and is not my pc network interface that has the problem. It is a router problem.
Is there anything I can do?
Thanks
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version :
ISP :
Hi,
I am using the TP-LINK TL-WR1043ND and I have update the firmware with TL-WR1043ND_v1_130428 firmware found on
http://www.tplink.com/en/support/download/?model=TL-WR1043ND&version=V1
website.
The problem I face is that the bandwidth (both wired and wireless) is just 1Mbit per second (1mbps) with UDP traffic, and 35-37mbps with TCP traffic.
I have tried changing the cat5e cable but again I face the same problem. I have used several softwares to check the bandwidth, like iPerf, and the results are the same. I factory reset the router but the problem remains the same. I have checked with a previous router and is not my pc network interface that has the problem. It is a router problem.
Is there anything I can do?
Thanks