WR841HP v3 unstable connection

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

WR841HP v3 unstable connection

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
WR841HP v3 unstable connection
WR841HP v3 unstable connection
2019-07-01 05:16:06
Model: TL-WR841HP  
Hardware Version: V3
Firmware Version:

I have been using WR841HP for around 3 years now, without any issues at all. Until recently, for the past few weeks, the connection became very unstable.

I have contacted the ISP, however, they claim that there isn't any issues on their side. So, I installed the original router that was provided to us and true enough, the connection is pretty stable and I am able to achieve 100mbps. However, even it's dual band, there is no 'wall penetration' technology thing, and the signal can't even get to upstairs. My repeater is of no help when there is no signal.

 

When I reinstalled WR841HP, the highest I can get is 40mbps (previously I am also able to achieve 100mbps). Yes, I have already updated the latest firmware.

Before, I have no issues getting wifi signal of 20mbps in my room located upstairs, until these few weeks, I am getting either fluctuating signal strength... For a few moments, I obtain 20mbps, most of the time between 1 to 5mbps. From time to time, it will get disconnected... The other rooms upstairs are getting pretty weak and unstable as well. I can summarise it in such a way that, 80% of the time 1 to 5mbps, wifi signal gets disconnected every one hour, and files that I am downloading indicates "network fail" and I will need to redownload them.

By changing channels (normally i assigned to auto), certain channels, I am not able to connect to the wifi at all...

Frustrated, I reset the router, and setup once again... The issue is the same...

I am getting very stable signal downstairs, but not upstairs.

My home package is 100mbps, I am not sure if my router is dying and I should get a like to like replacement, or upgrade to C58HP.


The general question is, is C58HP (or any long range router that anyone can recommend) better in terms of technology, range, etc compare to WR841HP. I am not expecting 100mbps in my room, even if it's 20 - 40mbps, I am alright. It's just that stability is what matters to me. What i understand is that, getting a higher speed router, does not mean that I will get faster internet connections. WR841HP is able to support up to 300mbps, which is more than enough.
My question is more in terms of stability and technology.

 

It is very frustrating when it happens a few times last two weeks ago, when I need to send out some documents urgently via email, I can't even send out files that is of a size of just like 2mb. In the end, I connect to my phone's hotspot.

 

Tried switching off both modem and router and restart it after a few minutes, results are the same.

 

Your kind advise is much appreciated. Been a few weeks now, I hope to put my wifi headache to rest as soon as possible.

  1      
  1      
#1
Options
3 Reply
Re:WR841HP v3 unstable connection
2019-07-02 06:47:01

Hi,

 

First, as you can see, the 841HP has the 100Mbps LAN ports, so the speed won't be higher than 100Mbps, and the 300Mbps is not the actual speed, it is the wireless link speed in PHY layer. 

 

Back to your case, it seems that you have done many troubleshooting, including reset and reconfigure, adjust the wireless settings and update the firmware, to be honest , there is not much we can do, it has been working for about 3 years, the hardware part may get aged which causes the unstable connection. 

 

Cause the old router works fine, the network environment should be fine as well, so in general, you can consider to buy a new router with better performance. Regarding to the C58HP you said, it has the 100Mbps ports as well. So the gigabit routerwill be a good choice which won't limit the speed. 

https://www.tp-link.com/home-networking/high-power-router/archer-c58hp/#specifications

 

Nice day. 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  1  
  1  
#2
Options
Re:Re:WR841HP v3 unstable connection
2019-07-03 04:39:40
Appreciate your time in responding to my wifi headache, I have procured C58HP online, and will update the post after installation. Hopefully the good news! Probably won't go for giga router for the time being, as this is only for home use and not a big fan of streaming. Near future, probably will consider another upgrade. Again, thank you for your valuable advice.
  0  
  0  
#3
Options
Re:Re:Re:WR841HP v3 unstable connection
2019-07-03 07:44:28

Thanks for your feedback, glad to help you.

 

You can take your time to install the C58HP and test its performance. 

 

Any updates, just let us know. 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#4
Options