Home Network Community > Range Extenders > MAC Address
< Range Extenders

MAC Address

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

MAC Address

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
MAC Address
MAC Address
2019-05-11 13:38:14
Model: RE270K  
Hardware Version: V1
Firmware Version: .1.10 Build 20170920 rel.41527

I want to set a static IP for this range extender. When I look on the unit itself, its MAC address starts with 50:. If I look at the router level and with apps that report network ip addresses the RE270K's MAC address starts with 52:

 

I have never seen this before. I also own a RE370K and that one doesn't have that problem at all.

 

The question is how does this happen and what do I do at the router level? At the moment I have used 52: for the RE270K's MAC address. Does that make sense? 

 

 

  0      
 
  0      
 
#1
Options
1 Reply
Re:MAC Address
2019-05-15 10:35:53

Hi,

 

The MAC address starts with 50 is the MAC address of the 2.4GHz / ethernet port of the RE270K.

 

While for your information, the RE270K uses proxy mode to connect to the front-end router, and it will create a virtual MAC address to connecte to the router, This MAC address starts with 52, which you saw on the router's web interface. 

 

So you do not have to worry about it, it is normal. And it won't affect the performance of the router or extender. 

 

If you want to setup a static IP for the extender on the router's web interface, you can use the MAC address which you saw on the web interface of the router to do it. 

 

Or you can use it as dynamic IP to get IP address from main router automatically. 

 

May it help and have a nice day. 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 775

Replies: 1

Related Articles
Change MAC address
516 2
MAC address used for WDS
1478 0
Mac address
251 0
Mac address
1095 0
MAC Address
784 0
MAC Address filtering on Deco M5
9652 4
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.