Limited transfer speed even if the Powerlines are connected at 300 Mbps?! + QoS Profiles Manual
Good morning,
I would have 2 questions to do:
___ Cable eth -> NAS
|
1. I have the following configuration: Modem Router |
| ___ Cable eth -> Powerline A -> Power grid -> Powerline B -> Cable eth -> Notebbok
If I connect my Notebbok directly to the Modem, the transfer speed from Notebbok to NAS is on average greater than 30MB/s.
If I connect my Notebbok to the Modem via the Powerline (as per the scheme mentioned above), the transfer speed from Notebbok to NAS is on average less than 10MB/s.
NB: The connection speed between the two Powerlines is constantly greater than 300Mbps (verified by tpPLC Utility);
The signal on the 2 power lines of the signal strength is yellow;
The speed of the Notebook and the NAS is 1Gbps.
- Why is the transfer speed, using Powerlines, so low? Theoretically, with the data I have provided, should the transfer speed not be equal to 30MB/s (having the connection speed between the 2 Powerlines of at least 300Mb)?
- How can i improve it?
- The connection speed showed by tpPLC Utility, is true? Exactly, what is it?
----------------------------
2. In your site/manuals i have not found any information regarding the description associated to the QoS profiles that can be set through tpPLC Utility. It is possible to have a descriptive manual with such information (in the support page of the product in question i have not found nothing)? Someone can provide it to me?
Thank to all!
Greetings.