Slow internet speed when connecting the powerline & DSL to the same wall outlet

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Slow internet speed when connecting the powerline & DSL to the same wall outlet

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Slow internet speed when connecting the powerline & DSL to the same wall outlet
Slow internet speed when connecting the powerline & DSL to the same wall outlet
2019-04-16 17:38:14
Model: TL-PA8010P KIT  
Hardware Version: V2
Firmware Version:

Greetings,

 

I have bought TP-Link AV1200 powerline adapters (Pass through type) to expand my network from the ground floor to the first floor.

 

I have connected the first powerline adapter directly to the wall outlet, and plugged the DSL to the pass through plug of the powerline; so both the powerline and the DSL are connected to the same wall outlet, and connected them using ethernet wire.

Then I have connected the second powerline adapter directly to the wall in the first floor and connected it with my MacBook Pro using ethernet wire to check the speed.

 

My internet speed from the telecom company is about 20 Mbps.

However, after doing a speed test, the speed was about 3 Mbps!

 

So after that, I have connected the powerline in the ground floor to a different wall socket than the DSL and kept the same ethernet connection (Only 3m apart). The speed jumped to about 18 Mbps!

 

My question: what is the reason for the slow speed of the internet when connecting the DSL to the same wall outlet as the powerline adapter? and is there a way to connect them to the same wall outlet without slowing the internet speed?

  0      
  0      
#1
Options
1 Reply
Re:Slow internet speed when connecting the powerline & DSL to the same wall outlet
2019-04-17 08:18:00

Hi,

 

There is some faqs about what will effect the powerline speed:

https://www.tp-link.com/support/faq/409/

https://www.tp-link.com/en/support/faq/882/

 

So it is suggested to plug the powerline devices into wall sockets seperately.

 

Good day!

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options