RE450 Bricked - How to access recovery mode and solve the problem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

RE450 Bricked - How to access recovery mode and solve the problem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
RE450 Bricked - How to access recovery mode and solve the problem
RE450 Bricked - How to access recovery mode and solve the problem
2019-03-04 23:12:27
Model: RE450  
Hardware Version: V2
Firmware Version: RE450_V2_171220
Hi

I've been updating the RE450 and after the update it does not give IP address anymore and only stays with the power light, searching the internet I saw that the repeater may have "Bricked" and I have that access recovery mode to correct the problem. two issues:
1) How do I to enter the RE450(BR) in "recovery mode" and what is the procedure that do i have to do ? 
2) Do you suggest anything else that can solve the RE450?

Thank you for your help

Best Regards

 

 

 

  0      
  0      
#1
Options
6 Reply
Re:RE450 Bricked - How to access recovery mode and solve the problem
2019-03-05 07:43:13

Hello, there is only power light on after you upgraded the firmware, did you try to reconfigure it with the below instruction: 

https://www.tp-link.com/en/download/RE450.html#video or https://www.tp-link.com/en/faq-1400.html 

 

And the RE450 does not support firmware recovery.

 

Good day. 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:Re:RE450 Bricked - How to access recovery mode and solve the problem
2019-03-05 11:35:46

Hi

Thanks for your feedback, the problem is that I can not get into this setup .. I tried everything to access the RE450
I've tried http://tplinkrepeater.net or http://192.168.0.254 and nothing happens ... only power light accesses ... Thanks...

 

 

  0  
  0  
#3
Options
Re:RE450 Bricked - How to access recovery mode and solve the problem
2019-03-06 10:39:46

Thanks for sharing this to us. It is a nice post. Get complete details about the latest apps. 

https://ttop10.org

  0  
  0  
#4
Options
Re:Re:Re:RE450 Bricked - How to access recovery mode and solve the problem
2019-03-07 03:18:37

julianoctba wrote

Hi

Thanks for your feedback, the problem is that I can not get into this setup .. I tried everything to access the RE450
I've tried http://tplinkrepeater.net or http://192.168.0.254 and nothing happens ... only power light accesses ... Thanks...

 

 

hey, can you see the default wifi network name after you reset  the RE450?

 

What is the IP address and default gateway of your computer with it connected to the extender? You can use the default gateway to login. 

https://www.tp-link.com/en/faq-838.html

 

If still does not work, you need contact the tech support to get warranty service. 

https://www.tp-link.com/en/support/contact-technical-support/#Hotline-Support

  0  
  0  
#5
Options
Re:Re:Re:Re:RE450 Bricked - How to access recovery mode and solve the problem
2019-03-09 12:36:04

Hi

Thanks for your replay, but still not working, dont find IP adress

I will contact TP-Link Support

Best Regards

Juliano

 

  0  
  0  
#6
Options
Re:Re:Re:Re:Re:RE450 Bricked - How to access recovery mode and solve the problem
2019-03-11 07:38:57

julianoctba wrote

Hi

Thanks for your replay, but still not working, dont find IP adress

I will contact TP-Link Support

Best Regards

Juliano

 

Hi

 

What a pity, it seems that it is faulty.

 

Hope that device is still under warranty, and then you can get a replacement.

 

Good day. 

  0  
  0  
#7
Options