How to activate uPnP at the Deco M9
Hi Fellow Deco users,
I am trying to get my plex application to be accessed from outside the network and it seems that it is impossible to activate uPnP?
Plex require this to be on but I can't find it anywhere in the app??
Anyone an idea?
Thank you!
Dennis
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Seems like upnp is always enabled for deco m5 & m9, and you can't disable it. maybe something else is blocking it? inbuilt antivirus/intrusion prevention? Or maybe plex needs port forwarding?
- Copy Link
- Report Inappropriate Content
UPnP is a bad idea and is always vulnerable for an attack. if the default being enabled is true then it's a serious matter and sad.
- Copy Link
- Report Inappropriate Content
You are correct that it needs port forwarding and that is what I did (port 32400).
Appartently I am in double NAT setup.
Setup as follows:
UPC router (in bridge modus)
DECO m9 (acting as router)
Switch
DECO M9 (connected via UTP
DECO M9 (connected via UTP)
my external IP address is x.x.15.255 while the WAN IP on my Deco App says that I am at 192.168.178.10 (while my LAN IP is 192.168.68.1).
So basicly I need to turn of the NAT setting I think, any idea?
- Copy Link
- Report Inappropriate Content
Sorry, don't know about the UPC router...seems like it's issuing the lan address. You could try and setup deco in AP mode.
You may want to delete your external IP address from the post!
- Copy Link
- Report Inappropriate Content
Internetworker wrote
UPnP is a bad idea and is always vulnerable for an attack. if the default being enabled is true then it's a serious matter and sad.
yeah, agree....any tplink rep care to comment on whether upnp can be disabled?
- Copy Link
- Report Inappropriate Content
The problem was solved by calling UPC (again) and asking them to put the router in bridge modus (which the apparently not have done earlier).
Still keen to understand whether upnp could be turned of manually at the Deco M9?
- Copy Link
- Report Inappropriate Content
In future updates, will plan a switch for UPnP. Then you will be able to control this feature.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Amazing that a customer can NOT disable UPNP....
Any idea when the new firmware with the UPNP switch will be released???
I experience more and more firmware/software shortcomings. My patience is not endless. Competition looks more attractive every day.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 27327
Replies: 27
Voters 0
No one has voted for it yet.