Archer C7 - OpenVPN not working
Hardware Version :
Firmware Version : 1.0.7 Build 20180425 rel.62587(4555)
ISP :
(Archer C7 v4.0)
I have OpenVPN enabled but it's not working
Port 1194 can't be reached from outside. is there any additional steps to forward it?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
i had my public ip under heavy nat - contacted my isp, they told me how to get a public ip, and now vpn works
- Copy Link
- Report Inappropriate Content
https://www.tp-link.com/en/faq-1544.html
also, I've sent an email to tp-link customer service, but no answer yet
- Copy Link
- Report Inappropriate Content
i had my public ip under heavy nat - contacted my isp, they told me how to get a public ip, and now vpn works
- Copy Link
- Report Inappropriate Content
epancini wrote
tp-link customer service replyed and helped me (suprisingly they were helpful and kind!)
i had my public ip under heavy nat - contacted my isp, they told me how to get a public ip, and now vpn works
I have an Archer AC 1200 v3 TP Link router and am using a Netgear LB 1120 LTE Modem with T-Mobile data plan. Can't get OpenVPN client to connect in, Can you share the advice they gave you on this thread so I can get mine working?
- Copy Link
- Report Inappropriate Content
my isp gives ip under nat by default. if you ask them, they'll give you a public ip for free with no guarantees (they can rollback the decision at any time). Or you can pay and rent a static ip.
I totally ignore T-Mobile policies so I can't say how they behave.
- Copy Link
- Report Inappropriate Content
I assume the router opens it automatically
(I don't a "Port Forwarding" page. There is "Virtual Servers" under the "NAT Forwarding" menu). Initially I've tried, cause I was suspecting that this was the issue, but I couldn't make it anyway since in the port page you can specify a network device in the router subnet, but not the router ip itselft)
- Copy Link
- Report Inappropriate Content
@epancini did you manage to resolve this issue?
I have the same problem too and I am curious if is there any solution, workaround.
- Copy Link
- Report Inappropriate Content
Hello, as you can see the OP's VPN issue was resolved in 2018, this is quite an old thread, it is suggested to open your own to start discussing.
Kindly check the below VPN setup instructions again to confirm all the settings on the C7 are correct:
OpenVPN Setup: https://www.tp-link.com/support/faq/1544/
PPTP VPN Setup: https://www.tp-link.com/support/faq/1545/
BTW, please also provide us your network topology.
Then you can check the VPN Tunnel: login the web interface, and on the VPN Server -> VPN Connections, we can see the status of the VPN Server, confirm if there is a VPN connection enabled. If not, which means the VPN setup is not successful.
You can also refer to this article if the VPN still fails:
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 6708
Replies: 7
Voters 0
No one has voted for it yet.