Home Network Community > Wi-Fi Routers > TL-WR840n v4 - Error 4503 in upgrading firmware
< Wi-Fi Routers

TL-WR840n v4 - Error 4503 in upgrading firmware

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

TL-WR840n v4 - Error 4503 in upgrading firmware

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-WR840n v4 - Error 4503 in upgrading firmware
TL-WR840n v4 - Error 4503 in upgrading firmware
2018-08-05 01:42:57 - last edited 2021-09-03 06:36:26
Model : TL-WR840n
Hardware Version : v4
Firmware Version :

ISP :

Hi to all!

I tried several times, from several differente O. S. and browser to upgrade the firmware.
Always the same answer: error code 4503

My actual firmware and hardware versions are:




I tried to upgrade with the versions in this page (obviously v4 version) https://www.tp-link.com/br/download/TL-WR840N_V4.html#Firmware

That's the label on the back of the router:




Anybody knows what is the problem?

Thanks!
  3      
 
  3      
 
#1
Options
1 Accepted Solution
Re:TL-WR840n v4 - Error 4503 in upgrading firmware-Solution
2021-09-03 06:36:21 - last edited 2021-09-03 06:36:26

Hello all, this is a quite old thread, but I agree with @hijani that whenever you download and or upgrade the firmware on a TP-Link device, do remember to verify its country code and hardware version before upgrading, ensure you choose the correct firmware to install on your device.

 

Back to the initial question that some of you failed to upgrade the firmware on the TL-WR840N<W> v4.0, I guess this is special and customized hardware that was developed for the local Service Providers, so you cannot install the generic firmware on it.

 

If any of you can confirm this for others, we would appreciate that.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#17
Options
13 Reply
Re:TL-WR840n v4 - Error 4503 in upgrading firmware
2018-08-06 09:45:01
Since your current hardware version is V4, you can only update firmware of V4.
Did you download the firmware of V4 and update it?

Different hardware versions can not be updated.
  5  
  5  
#2
Options
Re:TL-WR840n v4 - Error 4503 in upgrading firmware
2018-08-06 10:08:02

Aprilcoco wrote


Did you download the firmware of V4 and update it?


Yes, V4!

I took I picture of the label of the router:





there's a (W) close to the model version: it means something?

I didn't find in tplink site a firmware with (W)...

thanks
  0  
  0  
#3
Options
Re:TL-WR840n v4 - Error 4503 in upgrading firmware
2018-08-11 21:49:48
Reading further on the web I discovered that model v4 (W) comes with the possibility, by default, of uploading config file by tftp server. Maybe it is possible to update firmware by the same way. Anybody knows?
  3  
  3  
#4
Options
Re:TL-WR840n v4 - Error 4503 in upgrading firmware
2018-09-15 12:06:19
Hi There... I have the exactly same situation here...

I have two Routers

One TL-WR840N





And one recently acquired TL-WR840N





I had visited the link https://www.tp-link.com/br/download/TL-WR840N_V4.html#Firmware in order to download the firmware corresponding to my hardware version.

The file https://static.tp-link.com/TL-WR840N(BR)_V4_170512.zip has been successfully applied in the TL-WR840N and now this hardware have the following status:

Versão de Firmware:0.9.1 4.16 v004c.0 Build 170512 Rel.41231n


Versão de Hardware:TL-WR840N v4 00000004

But when I try perform the firmware upgrade on the TL-WR840N I ended up with the error 4503

Erro de Código: 4503



O arquivo enviado não foi aceito pelo dispositivo. (Sent file wasn't accepted by the device)

What I can do in order to have my brand new device updated with the same firmware that I have my old hardware...
  2  
  2  
#5
Options
Re:TL-WR840n v4 - Error 4503 in upgrading firmware
2018-09-18 04:55:52
Guys unplug the router from the phone line, you should only have the RJ45 connected from router to PC, HTH.
  3  
  3  
#6
Options
Re:TL-WR840n v4 - Error 4503 in upgrading firmware
2018-09-19 16:49:10

Hannibal Lackluster wrote

Guys unplug the router from the phone line, you should only have the RJ45 connected from router to PC, HTH.



Thanks for the hint... but this router doesn't have "phone line" jack...

There is only LAN's/WAN port on it.

And of course i'm trying to update this firmware thru Ethernet port.
  0  
  0  
#7
Options
Re:TL-WR840n v4 - Error 4503 in upgrading firmware
2019-05-07 11:56:38 - last edited 2019-05-07 11:57:40

After trying to fix it a lot times, finally I found a solution. Yeah, you was right, correct solution is updating throught tftp server. 

Weird bug, I can't understand why all files .bin don't was working, but now I can upgrade or downgrade! Finally!

  0  
  0  
#10
Options
Re:TL-WR840n v4 - Error 4503 in upgrading firmware
2019-10-18 19:28:39

@Temporary 

how did you actually do it via the ftftp? I tried it a couple of times with numerous ftfp servers but no results. please advise

  0  
  0  
#12
Options
Re:TL-WR840n v4 - Error 4503 in upgrading firmware
2019-10-23 07:35:09
Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#13
Options
Re:TL-WR840n v4 - Error 4503 in upgrading firmware
2020-08-15 00:50:26

Thanks man that was simple enough just had to unplug from Internet. No more error.

@Hannibal Lackl 

  1  
  1  
#14
Options
12

Information

Helpful: 3

Views: 58080

Replies: 13

Related Articles
 Firmware error 4503 tl-wr840n
2232 0
 Error 4503 TL-WR840n firmware
1449 0
 Error 4503 upgrading firmware
445 0
 Error 4503 when upgrading firmware
795 0
  Error 4503 in upgrading firmware
7927 0
 Error 4503 TL-WR840n firmware update problem
2112 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.