[VR2800] FASTWEB provider

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

[VR2800] FASTWEB provider

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
[VR2800] FASTWEB provider
[VR2800] FASTWEB provider
2018-03-26 15:35:05
Firmware Version:0.3.0 0.9.1 v006c.0 Build 170809 Rel.42095n Hardware Version:Archer VR2800 v1 00000000

Hello,

My modem should work with Fastweb aDSL (italian provider), but I can't get the connection, even selecting the pre-configured settings on the VR2800 fot Fastweb provider.

I know I should set:
VPI 8, VCI 36,

INCAPSULAMENTO LLC,

PROTOCOLLO*RFC 2684 Bridged (dinamica).




...but I can't find where to set RFC protocol / Bridge; Suggestions?




Thanks a lot

Enrico

































Thanks
  0      
  0      
#1
Options
2 Reply
Re:[VR2800] FASTWEB provider
2018-03-28 10:12:13
have you asked Fastweb aDSL about the connection type? it is PPPOE or PPPOA, dynamic ip/dhcp?
by the way, is the dsl light solid on?
you can find more settings under advanced--network---internet--add
  0  
  0  
#2
Options
Re:[VR2800] FASTWEB provider
2018-03-28 16:08:24
Hello, thanks for answering.

I think (I'm optimistic) I solved simply cloning the MAC address of the Fatweb router on the VR2800 and enabling SRA (even if maybe this is not important related to the original problem, but...). After re-registering the modem on-line (a procedure asked from Fastweb) the modem is online: the quality of the line is excellent.

I strangely lost the DynDNS connection to reach the router from outside my LAN, but for the rest everything is working very well by now.
  0  
  0  
#3
Options