LAN IP 192.168.0.1 Not Working

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

LAN IP 192.168.0.1 Not Working

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
LAN IP 192.168.0.1 Not Working
LAN IP 192.168.0.1 Not Working
2018-03-18 01:36:38
Model :

Hardware Version :

Firmware Version :

ISP :

Hi, I have a TD-W8980 router. I'm able to set the LAN IP to 192.168.0.1 with a Subnet mast of 255.255.255.0, but after saving and rebooting I am not able to access the router at 192.168.0.1. DHCP is working, I'm getting 192.168.0.100 and I can ping 192.168.0.1, but when I point my browser to 192.168.0.1 I get 500 Internal Server Error. Any idea what is happening?

Thank you,

MIke
  0      
  0      
#1
Options
4 Reply
Re:LAN IP 192.168.0.1 Not Working
2018-03-19 19:37:53
try another computer or browser? never heard of this. you can contact tp-link support for suggestion.
  0  
  0  
#2
Options
Re:LAN IP 192.168.0.1 Not Working
2018-04-02 02:40:51
Hi. Have you solved this problem yet? I think that you may have the same issue as me. If it is the same issue, then using another computer or another browser will not help.

My issue started when I upgraded the firmware to the latest release for my model. Afterwards I no longer had access to the web UI to manage the device. My device is a WDR3600 configured as a WAP.
It is still working well as a WAP on my home LAN, providing wifi access to my modem from Win 10 PCs and laptops, Chromebook, Android phones and guests' IOS devices. I just cannot log in to manage it anymore over wifi or over ethernet. I could use either before. I have also tried with different browsers.

My WAP has a fixed IP address. When I ping this address over wifi from my laptop or over ethernet from my PC I get 'Destination host unreachable'.

Checking online forums I have learned that this problem is quite common and worse it is reported that TP-Link has not addressed the issues.

Was the management UI function working prior to your issue? Did you upgrade your firmware?
  0  
  0  
#3
Options
Re:LAN IP 192.168.0.1 Not Working
2018-04-02 18:11:17
Shouldn't it be 192.168.1.1 ?
  0  
  0  
#4
Options
Re:LAN IP 192.168.0.1 Not Working
2018-04-02 18:34:53
Since seeing this and responding I noticed there are 2 threads with this issue,

Looking at the AD7200 issue it says to use 192.168.0.1 but it also says to use 192.168.1.1 if that fails, however chaps I would suggest you check your browser cookie settings as a no cookie policy will prevent you logging in to the router page, hth.
  3  
  3  
#5
Options