NAT boost & CPU usage problem
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
NAT boost & CPU usage problem
Model : Archer C1200
Hardware Version :
Firmware Version : 1.1.1 Build 20170706 rel.65715 (EU)
ISP : Internet bandwidth - 250MBps
Hello,
After firmware upgrade to 20170706 rel.65715 (EU) I experience following problems:
1. When "NAT boost" turned on, Wi-Fi (2.4GHz & 5GHz) download speed in my LAN drops to 40KB/s (e.g. channel streaming from sat receiver, video streaming from SAMBA, FTP is impossible), but Wi-Fi internet connection is ok (up to 230 Mbps at 5GHz). When function is switched off Wi-Fi download speed in LAN is normal (aprox. 5-7MB/s), but Wi-Fi internet connection drops to 50-70Mbps;
2. CPU usage is very high - from 70% to 100% every time.
Should I downgrade to 160918 firmware or is there another solution?
Best regards and waiting for quick reply,
Andrey Samonov
Hardware Version :
Firmware Version : 1.1.1 Build 20170706 rel.65715 (EU)
ISP : Internet bandwidth - 250MBps
Hello,
After firmware upgrade to 20170706 rel.65715 (EU) I experience following problems:
1. When "NAT boost" turned on, Wi-Fi (2.4GHz & 5GHz) download speed in my LAN drops to 40KB/s (e.g. channel streaming from sat receiver, video streaming from SAMBA, FTP is impossible), but Wi-Fi internet connection is ok (up to 230 Mbps at 5GHz). When function is switched off Wi-Fi download speed in LAN is normal (aprox. 5-7MB/s), but Wi-Fi internet connection drops to 50-70Mbps;
2. CPU usage is very high - from 70% to 100% every time.
Should I downgrade to 160918 firmware or is there another solution?
Best regards and waiting for quick reply,
Andrey Samonov
