Not understand your language. Can you write in English?

I have the same problem with my WR849N, V4 Firmware version 0.9.1 3.16 v004c.0 Build 170122 Rel.56399n.

I updated the firmware recently and restored factory settings, but the problem still occurs.

Every morning or for Windows 10 PCs every time it comes on I need to restart the router so that the PC can connect. My WebOS TV never connects to the router (says it's connected but doesn't access internet. And my Android phones depends on this daily restart to connect.

The router is set as DHCP and wireless security as WPA/WPA2, the settings are quite standard, I used this with all my previous routers and had no problem.

Anyone can help, please?

WR849N? Is that a tplink model?
If you have to reboot the router to get wireless connection, check if firmware update available.

I updated the firmware, but it did not solve the problem.

I took it back to the shop and got a new one. The new one worked perfectly. Thanks.

Dear flying snow,
Find below the translated text for your knowledge...
.
I own a TL-WR849N V4 Firmware 170122 and my ISP is NET.
Every morning WiFi is ON but NO internet connection. Only WiFi signal is active.
However, through cable connection it works properly.
I have already updated the firmware and I did all the router configuration with no success.
To get around this problem it is necessary to restart the router every morning.
Is the router in trouble?
I'd like you to point out a solution, thank you.


I'd like you to point out a solution, thank you.

Tenho 2 Roteadores TP-Link TL-WR941HP V2 de 1000mw uso GVT-VIVO um Roteador é Principal e o outro Como Repetidor. O Repetidor sempre cai a conexão do Wi-Fi, o cabo funciona normal. Já percebi q isto é depois de um tempo q ele fica sem usar, mas não sei quanto tempo. Geralmente faço isso também, preciso reiniciar o roteador todas as manhãs... Já inverti a configuração dos roteadores e qualquer um dos dois q usa o modo repetidor acontece isso.

E outra coisa, também não consigo acertar a Data e Hora ele não consegue sincronizar o NTP com servidor, já coloquei vários e não adiantou. O Pior é que não dá opção para acertar manualmente.