Home Network Community > Access Points > TL-WA801ND stops AP wifi
< Access Points

TL-WA801ND stops AP wifi

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-WA801ND stops AP wifi

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-WA801ND stops AP wifi
TL-WA801ND stops AP wifi
2017-10-27 19:28:46
Model: TL-WA801ND
Hardware Version : WA801ND v3 00000000
Firmware Version : 3.16.9 Build 160223 Rel.48414n
ISP : Free

hi.
I have a TL-WA801ND and made a basic usage of it with a phone, a tablet and some raspberry pi connected to the wifi AP. I never got problem with it.

Now I have device streaming audio to another one 24/7 (sort of) because it does not last more that a day.

I mean the AP is still up and advertised because it appears in the list of nearby wifi AP, but no device can connect to it.
I can login into it from another PC via ethernet and can't see anything in the log.

I have to reboot it to get the functionnality back.

What's wrong ? It is so cheap it can't handle such a traffic ?

Edit:
I can see this in the log, what is it ?? It has not even locked up yet. I jsut rebooted it;
[CODE]Oct 26 23:42:40 OTHER INFO MSG WARNU#647266|
Oct 26 23:42:45 OTHER INFO MSG WARNU#647269|
Oct 26 23:42:50 OTHER INFO MSG WARNU#647271|
Oct 26 23:42:55 OTHER INFO MSG WARNU#647268|
[/CODE]
  1      
 
  1      
 
#1
Options
4 Reply
Re:TL-WA801ND stops AP wifi
2017-10-30 19:41:01
The log doesn't tell valuable information.
Normally how many devices are connected to the AP totally?
What's the operation mode of the access point?
When you use a PC to login to the web page using Ethernet connection, is the PC connected to the AP or main router?

Beside,you can try to change the channel of the ap to 1/6/11 and channel width to 20MHz.
These settings can make the AP more stable.
  1  
  1  
#2
Options
Re:TL-WA801ND stops AP wifi
2017-10-31 01:15:32

uutommi wrote

The log doesn't tell valuable information.
Normally how many devices are connected to the AP totally?
What's the operation mode of the access point?
When you use a PC to login to the web page using Ethernet connection, is the PC connected to the AP or main router?

Beside,you can try to change the channel of the ap to 1/6/11 and channel width to 20MHz.
These settings can make the AP more stable.


there are at max 5 devices connected to the AP. But only one generates a lot of traffic.
the AP operates on bridge mode.

The pc is connected to the main router.

Well, the problem did not happened again since I complained here, so far. That's an improvement
  0  
  0  
#3
Options
Re:TL-WA801ND stops AP wifi
2017-10-31 16:10:17
Great. If the issue happens again, like I said, you can change the channel of your router to a static one which is less interfered by other channels.
Move the 801ND a little close to your main router may also help.
Besides, bridge mode may have some compatibility issue, suggest you to use repeater mode.
  0  
  0  
#4
Options
Re:TL-WA801ND stops AP wifi
2019-11-25 08:27:26

@zebul666 Hei, i have the same problem. Did you face the problem again after few years. Please help me, what did you do to solve that problem. You can email me at septyaandi24@gmail.com. Thanks a lot.

  0  
  0  
#5
Options

Information

Helpful: 1

Views: 2769

Replies: 4

Related Articles
 Ap tl-wa801nd
638 0
 TL-WA801ND AP Problem
609 0
 TL-WA901ND AP Stops Working - Needs Rebooting
5226 0
 WA801ND stops working until reboot
4861 0
 Tl-wa801nd
562 0
TL-WA801N AP No internet Access
1255 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.