Home Network Community > Powerline Adapters > TL-PA7020P utility can't see it
< Powerline Adapters

TL-PA7020P utility can't see it

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-PA7020P utility can't see it

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-PA7020P utility can't see it
TL-PA7020P utility can't see it
2017-10-12 20:54:29
Model : TL-PA7020PKIT

Hardware Version : V1

Firmware Version : unknown (stock)

Hello.

So, I connected all of my 7020s and they are all working without any issues.
I have 2 kits, but I only needed 3 of them so far and for some months now.
Now I decided to use the last one but when I plug it in, it is not visible in the utility.
The other adapters are updated to the last firmware and at the moment the last one cannot communicate/connect with the other 3 that I already had installed.

Is this last one faulty or what?

Thank you in advance.
  0      
 
  0      
 
#1
Options
6 Reply
Re:TL-PA7020P utility can't see it
2017-10-13 09:24:24
Did you pair the last one with others? Maybe manually add the last adapter via the utility?
  0  
  0  
#2
Options
Re:TL-PA7020P utility can't see it
2017-10-13 14:52:07
Yes indeed, sounds like you need to pair the extra one into the existing network. Unplug the extra one. On any one of the live ones, press the button for about a second. Now plug the extra one in, wait until it comes up, press its button for a second as well. Now the extra adapter should join the network and show good PLC network status on its LED.
  0  
  0  
#3
Options
Re:TL-PA7020P utility can't see it
2017-10-13 15:39:22
That didn't work. No reaction, nothing changed.
  0  
  0  
#4
Options
Re:TL-PA7020P utility can't see it
2017-10-13 15:42:49
So, I just tried to add it manually in the utility using it's key.
The utility replied "device added successfully" and the device is still not visible.

Though now the device is connected to the network now.
  0  
  0  
#5
Options
Re:TL-PA7020P utility can't see it
2017-10-13 16:40:20
Note that the PLC adapters, by default, enter powersave sleep mode fairly quickly when nothing is connected. In that state, they also disappear from the PLC network. Plug something into its LAN port, and it will come back on within seconds.
  0  
  0  
#6
Options
Re:TL-PA7020P utility can't see it
2017-10-13 16:41:01
Odd, maybe refresh trhe utility or connect the last unit to the computer to check
  0  
  0  
#7
Options

Information

Helpful: 0

Views: 669

Replies: 6

Related Articles
 Pair TL-PA4020P with TL-PA7020P
1535 0
 Can't see my TL-PA4010
764 0
TL-PA7020P AV1000 no ethernet light
517 0
 TL-WR841N - can't see SSID
1454 0
 Why can I not see all Powerline adaptors in the Utility?
3577 0
Can't see Reports in Deco app
5660 6
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.