Model :

Hardware Version :

Firmware Version :

ISP :

Hi all,
I just bought a TL-WR940ND V6 from Fry's electronics.
I want to experiment with dd-wrt on this model but I need to be sure that I can return to the factory firmware if desired.
Well here's the rub.
The firmware web page for the TL-WR940ND model has nothing higher than version 5 firmware, http://www.tp-link.com/us/download/TL-WR940N_V5.html
There is no version 6 firmware available.
Also, according to http://dd-wrt.com/wiki/index.php/Supported_Devices:
A 940 V1 runs an Atheros AR9132 at 400 MHz and has a 9V 850mA power supply.
A 940 V2 runs an Atheros AR9341 at 535 MHz and has a 9V 600mA power supply.
A 940 V3 runs an Atheros TP9343 at 750 MHz and has a 12V 1A power supply.

My 940 V6 says 9V 600mA on the back of the router.
So, I might guess that my V6 router is running an AR9341 at 535 MHz but, I would like to have better assurance that this is true.
Also, does anyone know of official TP-Link firmware that is correct for the TL-WR940N V6?
I am reluctant to experiment without a clearly defined TP-Link firmware to return to if needed.

Thanks all