TL-PS310U disappears from network after a while [SOLVED]
Hardware Version :
Firmware Version :
ISP :
Hi,
i am using the "print server" TL-PS310U with a Brother DCP-7030.
If i disconnect the power cord and connect it again all works fine.
But the next day the TL-PS310U disappears from my network and i have to disconnect and connect it from power again. The reset button does not work what is weird too. This is really annoying.
Anybody any suggestion what is wrong with my device ?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I had the same problem as @commanderz described. After 5-10 minutes, my TL-PS310U lost, disappears, no response to ping. The only way to bring it alive again was to reconnect from the power.
I can confirm, that new firmware, posted by @Shield101 (and new download link provided by @FadeFX in reply no. #16) solved this issue. Thank you very much! After a week, TL-PS310U is still online and working like a charm.
I have TL-PS310U rev 2.1, stock firmware ver. 2.064.000.T0209.
The new firmware is ver. 2.076.003.T0209.
To update new firmware, you have to use web management interface of the print server, using menu "Misc -> Firmware upgrade".
It would be fine to post new firmware in official support page of this printserver, because you can find more threads in this forum about this issue.
- Copy Link
- Report Inappropriate Content
Then I found someting about resetting the PS http://www.tp-link.com/en/faq-236.html
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Have a try? http://support.tp-link.com/f/d9a1031c9d/?dl=1
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 14503
Replies: 22
Voters 0
No one has voted for it yet.