Channel Width
How can I force the Deco system to use only 20MHz in the 2.4 band?
Hi David, I tried to do the update but the firmware version doesn't seem to have changed, in the app and on the website the firmware seems to be 1.2.6 Build 20240723 Rel. 939 even after the update.
I have all this deco on my network:
That is the process of the updade:
even after the update to the bata firmware it seems like nothing has changed
Hi, Thanks for the update.
I didn't realize that there were many other models in the Mesh system.
Could you please help me run a test:
You should be able to find the individual IP address for the satellite Deco XE200, "gala" or "area gourmet". Then it is suggested to access this IP and log into the individual UI of this satellite XE200 to update the beta firmware.
By the way, there seem to be 8 Deco units in the Mesh system. Are they all wirelessly connected to the Mesh network?
How many 2.4GHz smart home devices do you have, and what are these IoT devices, such as cameras, smart plugs/switches, and speakers?
Can I have some pictures of the Deco network map, such as:
Wait for your reply.
Best regards.
Hi David.
All decos are connected by cable, none of them are connected wirelessly.
I have more than 70 LTO devices, but none of them are cameras or speakers, all the speakers are connect to the 5Ghz band.
I managed to do the update, now the XE200 decos are running in the beta version that you sent to me.
Do I need to update the firmware of all Deco models or just the Deco Xe200, which is my main Deco? Should be an option for me to change the 2.4Ghz band settings in the deco app now that I did the update?
Just to know... in my main Wi-Fi network I enabled only 5Ghz and 6Ghz, my guest network are disable, and in my LTO Wi-Fi I enabled just de 2,4 Ghz band. It was the only way I found to make the 2.4 Ghz band work a little better.