Home Network Community > Wi-Fi Routers > Router with passthrough powerline adaptors recommendation
< Wi-Fi Routers

Router with passthrough powerline adaptors recommendation

Router with passthrough powerline adaptors recommendation

Router with passthrough powerline adaptors recommendation
Router with passthrough powerline adaptors recommendation
14 часов назад

Hi all

 

Soon to be a FTTP customer via Aquiss; they do not supply routers, however do recommend a number of TP devices (AX23/53/55/72 + Pro 55/72/95 + BE230/BE550

 

Only requirement i have is compatibility with pass through powerline adaptors.  I have 2x AV1000 in use currently, due to a shortage of accessible plug sockets - both less than 12 months old.

 

Can anyone confirm if/when the AV1000 will be compatible with say an AX55 or potentially a BE230 (if there is a valid reason, i may consider a Wifi7 compliant device)

 

Or do i need to replace the adaptors? TL-WPA8631P V3 

 

I think i am looking at OneMesh compatible routers for their powerline compatibility?

 

Thanks in advance

 

SP

 

 

 

  0      
 
  0      
 
#1
Options
3 Reply
Re:Router with passthrough powerline adaptors recommendation
13 часов назад - last edited 13 часов назад

  @sierra-papa 

 

It would be hard to obtain a Onemesh only compatible router these days because Easymesh is replacing Onemesh proprietary technology.

If you select one of the abive mentioned routers (they are all pretty much Easymesh capable) you can test it with your TL-WPA8631P V3.

If that doesn't work for you then probably buying a TL-WPA8631P V4 (Easymesh capable) would be the best approach - refer this thread.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#2
Options
Re:Router with passthrough powerline adaptors recommendation
час назад - last edited час назад

  @terziyski thanks for the reply.

 

i had only seen the V3 powerline kit with passthrough on the TP site, and that was showing as "planned" Easymesh compatibility, hence me looking at OneMesh routers, which shows the same V3 kit as being OneMesh compliant.

 

is the V4 the same hardware as V3 with different firmware?


Shame, seems i will need to discard the AV1000 adaptors to use rhe ISPs recommended router - note I don't have the TL-WPA8631P V3 *yet*

 

  0  
  0  
#3
Options
Re:Router with passthrough powerline adaptors recommendation
час назад

  @sierra-papa 

 

Hi,

 

May I ask what are the actual "Model" designations of both of your "AV1000" passthrough powerline adaptors? (should be printed on the serial number label on the rear side of each adaptor)

 

I already checked TP-Link's website, but couldn't find an "AV1000" Wi-Fi Powerline adapter that has a passthrough socket.

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 49

Replies: 3

Related Articles
Passthrough powerline drop out
565 0
Powerline adaptors with deco
2461 0
 Powerline Adaptors and a new router
880 0
 Powerline adaptors
726 0
 Powerline adaptors
264 0
Passthrough Powerline Kit Slow Speeds
2987 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.