RE305 and RE450
I have a VR2100 setup in router mode and 2x mesh nodes an RE305 and RE450 both nodes mesh up no issues with the VR2100 but here is the weird issue, both mesh nodes are setup with static addresses in their settings and in the wireless client section of the VR2100 both nodes appear fine and display correctly when setup but then as soon as i connect clients to either mesh node the node then displays the client address that just connected to it and not its own designated IP address. Everytime i refresh the client list on the VR2100 the mesh nodes will reappear and disappear in the VR2100's list displaying this first client that connects to its address.
I did post something similar earlier and have attempted reserving IP addresses for clients connected but not the nodes as they have static IP addresses allocated.
This issue is frustrating when i go into the VR2100 and see both nodes basically spoofing client addresses. I need to get both nodes prefererably not showing up at all in the client list as they are nodes not clients. Only my client devices should show up in the wireless client list on my VR2100.
Really some assistance much appreciated, someone else spoke about proxy and mac spoofing etc but i did not 100 percent understand how to resolve issue i have even attempted to seperate radios and SSID's to no avail. I have tried to setup from scratch also but nothing helps. Someone suggested taking both nodes out of mesh mode and run as extenders but this defeats the purposes of these mesh node with roaming devices and prefer to have them operating in mesh mode but not smart mode (band steered) as i have seperated the radios.
All mesh nodes should not display as clients and should be hidden from the wireless client list when in mesh mode perhaps this is a bug in the wireless client list section on why this keeps occuring.
