Home

Forums

Stories

Knowledge Base

Home Network Community > Deco > Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter

< Deco

Official Release Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter

David-TP

a week ago - last edited a week ago

Posts: 12460

Helpful: 1721

Solutions: 1200

Stories: 9

Registered: 2020-04-14

Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter

a week ago - last edited a week ago

Tags: #Firmware Update #WireGuard #Official #Matter

Model: Deco BE85

Hardware Version:

Firmware Version:

This Article Applied to:

Deco BE85_V1/V2

Modifications and Bug Fixes:

1. Added Wireguard VPN feature.
2. Added Matter feature.
3. Added Channel Selection feature.
4. Added to the option to enable/disable 2.4GHz Backhaul Mode.
5. Improved stability and security of the system.
6. Improved the HomeShield features.
7. Fixed the issue that satellite units might be displayed as "offline" in Deco APP if there are lots of Tapo devices in the network.
8. Fixed the issue that the Guest wireless may be unable to access the Internet in some cases.
9. Fixed the issue where the monthly report statistics were inaccurate in certain cases.
10. Fixed the issue where the IPv6 Internet connection page would display empty in certain cases.
11. Fixed the issue where SafeSearch would deadlock in some scenarios.
12. Fixed the known issues that led to the crash and auto-reboot on the Deco side.
13. Fixed the issue that some IOS devices fail to connect to wireless in certain cases.

Firmware Download Link:

Deco BE85_V1/V2

Deco BE85_V2_1.1.1_241023.zip

Update Advice:
1. Please make sure the Deco APP is up-to-date.
2. How to manually update the firmware via web UI- How to Update the Firmware of Deco.
3. The firmware downgrade needs to be through Firmware Recovery - How to Downgrade Deco.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.

9 Reply

Luis-Camacho

LV1

a week ago - last edited a week ago

Posts: 4

Helpful: 12

Solutions: 0

Stories: 0

Registered: 2024-03-17

Re: Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter

a week ago - last edited a week ago

@david-tp

Hey man, please don't forget us. We've been waiting for a while for this deco update for the deco be 95.

MalusPumila

LV1

a week ago

Posts: 8

Helpful: 9

Solutions: 0

Stories: 0

Registered: 2024-09-30

Re: Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter

a week ago

@David-TP

Hi David.

I just updated to the new 1.1.1 and the VPN feature has disappeared from the menu.

Same thing when I go to the details screen, it does not show up.

Just to be sure, it does not show up in Deco Labs either.

I am attaching a screenshot.

This is a guess, but may be due to the fact that I purchased and use BE85 in Japan and use V6 Plus for my internet connection type.

David-TP

a week ago

Posts: 12460

Helpful: 1721

Solutions: 1200

Stories: 9

Registered: 2020-04-14

Re: Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter

a week ago

@MalusPumila

Hi, Nice to see you again.

I remember you reported this issue when installing the 1.1.1 beta the first time. The same issue repeated again on the official 1.1.1 version, right?

I used to think whether it was due to the beta firmware. It seems not.

Could you please help me summit the APP log here:

How to submit Deco APP log

Thank you very much and best regards.

Mudslideyo

LV2

a week ago

Posts: 32

Helpful: 15

Solutions: 0

Stories: 0

Registered: 2024-01-08

Re: Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter

a week ago

@David-TP I have upgraded and so far so good. 👍.

I do see the vpn options in my deco app if that helps

Thanks

MalusPumila

LV1

Monday

Posts: 8

Helpful: 9

Solutions: 0

Stories: 0

Registered: 2024-09-30

Re: Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter

Monday

@David-TP

Hi!

Thanks for the guidance, it's been a little while, but I'm sending Applog, please check back.

Diplofu

LV1

Yesterday - last edited Yesterday

Posts: 9

Helpful: 3

Solutions: 0

Stories: 0

Registered: 2024-10-24

Re: Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter

Yesterday - last edited Yesterday

@David-TP





1.Products purchased in Taiwan have also updated this firmware, 
  but from time to time the main DECO is disconnected!? I don’t know why?? 
  Is it caused by disabling 2.4G backhaul BUG?

  Or is it caused by an incompatibility between the APP version and the firmware?

2.This version of the firmware is very unstable. 
The APP keeps showing abnormal training messages of DECO disconnection (the line is confirmed to be OK...).
Can it be corrected and updated as soon as possible? TKS

3.After updating the firmware on the WEB setting page, 
the login time is too short and the message "Re-login" is displayed. 
Is there an option to set the login time?

4.The channel selection function cannot be used!? It can only be preset automatically??

5.What factors cause Memory Usage to be too high?

The system message is as follows

Sun Nov 17 11:00:05 2024 daemon.err nrd[30536]: netdb_requestDownlinkRSSI: not MLD!

Sun Nov 17 11:00:05 2024 daemon.err nrd[30536]: wlanifBSteerEventsHandleBeaconReport: Can't find local reported BSS on band of channel 0 for BSS 00:00:00:00:00:00

Sun Nov 17 11:00:08 2024 daemon.err nrd[30536]: estimatorDot11kIterateCB: Timeout waiting for 802.11k response from 9E:B8:09:9F:FD:8E

Sun Nov 17 11:00:14 2024 daemon.err nrd[30536]: wlanifMapToPhyMode: Invalid PHY mode from driver: 0

Sun Nov 17 11:00:14 2024 daemon.err nrd[30536]: wlanifConvertToSingleStreamMCSIndex: Invalid PHY mode from driver: 0

Sun Nov 17 11:00:14 2024 daemon.err nrd[30536]: wlanifMapToPhyMode: Invalid PHY mode from driver: 0

Sun Nov 17 11:00:14 2024 daemon.err nrd[30536]: wlanifConvertToSingleStreamMCSIndex: Invalid PHY mode from driver: 0

Sun Nov 17 11:00:14 2024 daemon.err nrd[30536]: wlanifMapToPhyMode: Invalid PHY mode from driver: 0

Sun Nov 17 11:00:14 2024 daemon.err nrd[30536]: wlanifConvertToSingleStreamMCSIndex: Invalid PHY mode from driver: 0

Sun Nov 17 11:00:14 2024 daemon.err nrd[30536]: netdb_requestDownlinkRSSI: not MLD!

Sun Nov 17 11:00:14 2024 daemon.err nrd[30536]: wlanifBSteerEventsHandleBeaconReport: Can't find local reported BSS on band of channel 0 for BSS 00:00:00:00:00:00

Sun Nov 17 11:00:17 2024 daemon.err nrd[30536]: estimatorDot11kIterateCB: Timeout waiting for 802.11k response from 9E:B8:09:9F:FD:8E

Sun Nov 17 11:00:23 2024 daemon.err nrd[30536]: triggerMonSteering: Failed to get uplink rssi for 9E:B8:09:9F:FD:8E

Sun Nov 17 11:00:25 2024 daemon.err nrd[30536]: netdb_requestDownlinkRSSI: not MLD!

Sun Nov 17 11:00:25 2024 daemon.err nrd[30536]: wlanifBSteerEventsHandleBeaconReport: Can't find local reported BSS on band of channel 0 for BSS 00:00:00:00:00:00

Sun Nov 17 11:00:03 2024 daemon.notice netifd: internet (18146): len < 0

Sun Nov 17 11:00:04 2024 daemon.err nrd[30536]: triggerMonSteering: Failed to get uplink rssi for 9E:B8:09:9F:FD:8E

Sun Nov 17 11:00:05 2024 daemon.notice nrd[30536]: prefer band set:0x6, bss channel:5

Sun Nov 17 11:00:05 2024 daemon.notice nrd[30536]: prefer band set:0x6, bss channel:48

Sun Nov 17 11:00:05 2024 daemon.notice nrd[30536]: nr_get_mesh_channel : channel_2g:2 .

Sun Nov 17 11:00:05 2024 daemon.notice nrd[30536]: nr_get_mesh_channel : channel_2g:10 .

Sun Nov 17 11:00:05 2024 daemon.notice nrd[30536]: nr_get_mesh_channel : channel_2g:6 .

Sun Nov 17 11:00:05 2024 daemon.notice nrd[30536]: nr_get_mesh_channel : channel_2g:5 .

Sun Nov 17 11:00:05 2024 daemon.err nrd[30536]: netdb_requestDownlinkRSSI: not MLD!

Sun Nov 17 11:00:05 2024 daemon.notice nrd[30536]: estimatorPerformMeasurement: Do 11k measurement for 9E:B8:09:9F:FD:8E on channel 48 from serving BSS APId 255 ChanId 5 ESSId 2

Sun Nov 17 11:00:05 2024 daemon.err nrd[30536]: wlanifBSteerEventsHandleBeaconReport: Can't find local reported BSS on band of channel 0 for BSS 00:00:00:00:00:00

Sun Nov 17 11:00:08 2024 daemon.err nrd[30536]: estimatorDot11kIterateCB: Timeout waiting for 802.11k response from 9E:B8:09:9F:FD:8E

due

LV1

Yesterday

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-11-17

Re: Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter

Yesterday

@David-TP does this mean that Deco BE85 officially supports the matter protocol and can be used as a border router?

David-TP

7 hours ago

Posts: 12460

Helpful: 1721

Solutions: 1200

Stories: 9

Registered: 2020-04-14

Re: Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter

7 hours ago

@Diplofu

Hi, Thank you very much for the update.

Could you please refer to this link to help me submit the Deco APP log:

How to submit Deco APP log

(Or please check whether there is a "Feedback" button on the bottom right.)

3.After updating the firmware on the WEB setting page,
the login time is too short and the message "Re-login" is displayed.
Is there an option to set the login time?

4.The channel selection function cannot be used!? It can only be preset automatically??

5.What factors cause Memory Usage to be too high?

--- Under the Deco APP>More>System, it should also add the CPU/Memory Information.

If you close the web UI, how about the "Memory usage" on the Deco APP? Is it still 66%?

For the "Channel Selection"' feature, did you try to set the channel through the Deco APP or web UI?

(It is not suggested to use the web UI and please try to edit it under Deco APP>WiFi Network.)

1.Products purchased in Taiwan have also updated this firmware, 
  but from time to time the main DECO is disconnected!? I don’t know why?? 
  Is it caused by disabling 2.4G backhaul BUG?

  Or is it caused by an incompatibility between the APP version and the firmware?

2.This version of the firmware is very unstable. 
The APP keeps showing abnormal training messages of DECO disconnection (the line is confirmed to be OK...).
Can it be corrected and updated as soon as possible? TKS

I remember the initial idea of adding the 2.4GHz Backhaul on/off toggle is to improve the Mesh stability since the 2.4GHz Backhaul is easily affected by other signals. So I don't think disabling the 2.4GHz Backhaul will cause the disconnection.

Would the main Deco BE85 turn red when Deco APP reported the "abnormal training messages of DECO disconnection"?

And Were the mobile devices able to access the internet service when Deco APP reported this error?

Wait for your reply and best regards.

David-TP

7 hours ago

Posts: 12460

Helpful: 1721

Solutions: 1200

Stories: 9

Registered: 2020-04-14

Re: Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter

7 hours ago

@due

Hi, I think the Matter Protocol on Deco mainly refers to supporting adding Matter devices under Smart Home on the Deco APP. It still can't be used as a Matter border router.

Thank you very much and best regards.

#10

Official Release Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter

Official Release Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter

This Article Applied to:

Modifications and Bug Fixes:

Firmware Download Link:

Information

Voters 0

Tags