Home

Forums

Stories

Knowledge Base

Home Network Community > Deco > Adguard on Deco x50 POE

< Deco

Adguard on Deco x50 POE

chrisofthewhite

3 weeks ago

Posts: 22

Helpful: 10

Solutions: 0

Stories: 0

Registered: 2024-07-11

Adguard on Deco x50 POE

3 weeks ago

Model: Deco X50 - PoE

Hardware Version:

Firmware Version:

Is it possible to get adguard running on an x50 POE, when in router mode?

When I try to change the primary DNS I get the error:

"This IP conflicts with LAN IP subnet. To use this server set it at DCHP server"

When I enter the IP address if the raspberry pi running home assistant and adguard into the dchp primary DNS I get no internet.

Thers a lot of info out there about missing the feature to specify a DNS and but I can't find anything specific on an x50 POE in router mode.

3 Reply

David-TP

3 weeks ago

Posts: 12460

Helpful: 1722

Solutions: 1200

Stories: 9

Registered: 2020-04-14

Re:Adguard on Deco x50 POE

3 weeks ago

@chrisofthewhite

Hi, Thank you very much for the feedback.

"When I enter the IP address of the raspberry pi running home assistant and Adguard into the DCHP primary DNS I get no internet. "

- Is it connected to the Guest Network when you have no internet connection?

- How about the Raspberry Pi? Is it connected to the Deco via an Ethernet cable or the main Wi-Fi network?

Wait for your reply and best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.

chrisofthewhite

LV2

3 weeks ago

Posts: 22

Helpful: 10

Solutions: 0

Stories: 0

Registered: 2024-07-11

Re:Adguard on Deco x50 POE

3 weeks ago

@David-TP

No I don't use the guest network so everything on the main network.

The raspberry pi is connected via ethernet to s switch, connected to main deco.

Maybe I'm missing a step, all I do is change the DCHP to the pi IP address. Is there something else I should do?

chrisofthewhite

LV2

3 weeks ago

Posts: 22

Helpful: 10

Solutions: 0

Stories: 0

Registered: 2024-07-11

Re:Adguard on Deco x50 POE

3 weeks ago

I got sorted, even though I had the IP Address as static for the Pi through my deco system, I didn't give it a static address in Home Assitant so it wasn't working.

(Just in case it helps somebody else).

Adguard on Deco x50 POE

Adguard on Deco x50 POE

Information

Voters 0

Tags