Compatibility question
Hi i recently installed the be550/9300 wifi 7 router and am very impressed.
However there are many dead spots in the house and I had hoped to add a few deco 65 satellites to create a mesh system as my house is already wired for ceiling mounted mesh satellites.
I have a gigabit switch also.
My question is should I return the router and just buy the new deco whole home system or could I could i add deco satellites to the router I have.?
I definitely need 2 x satellites on ceilings.
Thanks in advance for the help
Kind regards Adam
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@AdamGSK also would the router work as the hub fit the two satellites. I just assumed they would work together. Thanks
- Copy Link
- Report Inappropriate Content
Hi,
Both methods would work.The differences are as below.
Deco devices can work with Archer BE550, however they cannot establish a mesh network, which means they will broadcast two separate SSID.
So if you want only one mesh WIFI in your home, it is recommended to only use Deco Mesh system.
- Copy Link
- Report Inappropriate Content
@Sunshine thanks so much for your reply. I returned the 550 as I could not get the coverage for the house.
I am wired through each ceiling with cat 6 e and just would like to get a deco hub and two or three ceiling mounted satellite nodes.
Would you recommend a good hub and node system? I was looking at poe 50 but would need more signal. I need a hub router and two ceiling mount satellites nodes but I can get stand alone nodes for dead spots. As I have a lot poe capacity.
Thank you for your help and advice
- Copy Link
- Report Inappropriate Content
Hi,
If you need POE connection, then here are two Deco models for your choice.
- Copy Link
- Report Inappropriate Content
@Sunshine thanks so much for your help.
I can't find the 65 in the TP LINK amazon but the 50 are.
Would the 65 be much better performance?
Also will I need a router to the fibre modem for these to connect or does the fibre modem just connect to one and it becomes the master or main node?
Thanks for all the help.
Problem is that I have my ceilings wired for these and maybe I could have done things a better way but it's too late now as the house is built.
- Copy Link
- Report Inappropriate Content
@AdamGSK does anyone know much about this one BE25 BE3600?
It's supposed to be on the market from tomorrow and I was wondering if this would be the best ceiling mounted system?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 332
Replies: 6
Voters 0
No one has voted for it yet.