Business Community > Controllers > How to create many separate networks Omada
< Controllers

How to create many separate networks Omada

How to create many separate networks Omada

How to create many separate networks Omada
How to create many separate networks Omada
2024-08-01 11:21:58 - last edited 2024-08-02 11:52:03
Tags: #VLAN & Multi-Networks #ACL
Model: ER605 (TL-R605)   TL-SG3428   Omada Software Controller (Windows)  
Hardware Version: V2
Firmware Version:

Hello.

I have Omada network and I want to add new networks for our service and maybe other office. There is one building, our office and service, and a part rented for another office.

Our network can run on vlans but I want to connect rented office to the router e.g. LAN2 with different network as 192.168.1.x. How to set it up so the network for rented office is separated and a completely different address?

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:How to create many separate networks Omada-Solution
2024-08-02 08:59:59 - last edited 2024-08-02 11:52:03

  @JoseMorales 

Also, please follow this link to add PVID 10 to the port that connects the unmanaged switch.

How to configure VLAN on Omada Gateway via Omada Controller

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#6
Options
6 Reply
Re:How to create many separate networks Omada
2024-08-02 06:58:01 - last edited 2024-08-02 07:16:53

  @JoseMorales 

Please read our article, which provides a detailed explanation of this usage scenario.How to configure Multi-Networks & Multi-SSIDs on Omada SDN Controller

So, you need to create two VLAN interfaces and pick the right LAN interface for the SG3428 and the unmanaged switch separately.

How to configure VLAN on Omada Gateway via Omada Controller

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#2
Options
Re:How to create many separate networks Omada
2024-08-02 07:10:57

  @Hank21 I can use it to create VLAN for our office but I want to create different network for rented office and bypass the switch. LAN1 in router is for one office with 172.16.10.x and VLANs on switch 172.16.20.x ... 172.16.30.x etc. LAN2 in router is for rented office witch their address as 192.168.1.x. and their unmanaged switch.

  0  
  0  
#3
Options
Re:How to create many separate networks Omada
2024-08-02 07:30:27

  @JoseMorales 

You could Navigate to Settings > Wired Networks, then LAN > Networks. To build a VLAN for the unmanaged switch, pick the port that connects it as the LAN interface.The same goes for configuring the other switch.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#4
Options
Re:How to create many separate networks Omada
2024-08-02 07:41:33

  @Hank21 

I created a new network and assigned a port, but after connecting to this port I still get the address from the main network.

 

In the first network I have all ports selected and I can't edit it. All ports are selected.

  0  
  0  
#5
Options
Re:How to create many separate networks Omada-Solution
2024-08-02 08:59:59 - last edited 2024-08-02 11:52:03

  @JoseMorales 

Also, please follow this link to add PVID 10 to the port that connects the unmanaged switch.

How to configure VLAN on Omada Gateway via Omada Controller

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#6
Options
Re:How to create many separate networks Omada
2024-08-02 09:43:58

  @Hank21 

Oh, thats it! Thank You. So now all that's left is to block communication between these ports, vlans 1 and 10. If I think correctly, this can be done via Switch ACL from this link How to configure Multi-Networks & Multi-SSIDs on Omada SDN Controller | TP-Link Polska

  1  
  1  
#7
Options

Information

Helpful: 0

Views: 433

Replies: 6

Tags

VLAN & Multi-Networks ACL
Related Articles
Create multiple gateways Omada
661 0
How can create Vertul ip in omada
1291 0
 T2600G-28MPS how to separate networks?
930 0
 Vpn client-lan for acces to all vlan networks in my Omada network
2045 0
Configure a Network which has only acces to the internet
648 0
T1500G-8T v2.0 create LACP bonds on Omada
2893 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.