Hi @IT_nwtDep 

Thanks for posting in our business forum.

Are you looking for this?

Omada SDN Video-How to configure Multi-Networks & Multi-SSIDs with TP-Link Omada SDN Products

Or FAQ and CG.

Hi @IT_nwtDep 

IT_nwtDep wrote

  @Clive_A 

 

Thank you for the answer, I have already saw the video and the post.

As written on my first post I want that all the networks will be accessible from any port. If I leave the ports in "All profile", the secondary network doesn't work.

If you want me to find out what's wrong, upload pictures of your setup for me. Diagram as well.

There is nothing I can do with your plain description. I read it twice after the time you posted it, and I can only see a description of a plain fact. There is nothing specific. I also don't know how good your VLAN knowledge is.

If you don't bother re-examining your network, that'd be the best and most straightforward way to fix the problem here.

Or you may take a look at the guideline before the post in my signature on how-to get things resolved quickly.

Hi @IT_nwtDep 

Thanks for posting in our business forum.

IT_nwtDep wrote

  @Clive_A 

 

My knowledge of VLAN is not good and I think the problem is there.

Here a simple diagram (all devices must be connected together). Where is the error? The "All profile" (by default) in the switch L2 port is setted with Untagged Vlan 10 and Tagged Vlan 20. This can't work but how can I solve it?

 

 

Of course it does not work. I have marked it in the picture. This port should be set with the PVID and use the untagged port.