New Release Wi-Fi Routers Support DoH and DoT Network
Good news!
We are happy to announce that there is new official firmware rolling out for multiple routers, including the BE, AX, and AC series, which adds DoH and/or DoT. Welcome to upgrade and install this version of firmware to try it out.
This Article Applies to:
| Model & Hardware & Firmware | DoH | DoT | Update Date |
|---|---|---|---|
| Archer BE11000 Pro(US)_V1.6_1.1.0 Build 20240730 and newer versions | √ | √ | Sep 2, 2024 |
| Archer BE700 Pro(US)_V1.6_1.1.0 Build 20240730 and newer versions | √ | √ | Sep 2, 2024 |
| Archer BE550 Pro_V1&V1.6_1.1.0 Build 20240730 and newer versions | √ | √ | Sep 2, 2024 |
| Archer BE3600_V1_1.1.0 Build 20240729 and newer versions | √ | √ | Sep 2, 2024 |
| Archer BE230_V1&V1.6_1.1.0 Build 20240729 and newer versions | √ | √ | Sep 2, 2024 |
| Archer AX55(EN)_V1_1.3.3 Build 20240628 and newer versions | √ | √ | Aug 16, 2024 |
| Archer AX55(US/CA/TW)_V1_1.3.2 Build 20240325 and newer versions | √ | √ | -- |
| Archer C80_V1&V2.20_1.13.2 Build 230824 and newer versions | √ | -- | -- |
| Archer C6_V4_1.13.2 Build 230824 and newer versions | √ | -- | -- |
| Archer A6_V4_1.13.2 Build 230824 and newer versions | √ | -- | -- |
| Archer C64_V4_1.13.2 Build 230824 and newer versions | √ | -- | -- |
| Archer A64_V4_1.13.2 Build 230824 and newer versions | √ | -- | -- |
| Archer C86_V1_1.13.2 Build 230824 and newer versions | √ | -- | -- |
| Archer A8_V1&V2.20_1.13.2 Build 230824 and newer versions | √ | -- | -- |
| Archer C59(US)_V4&V4.8_1.13.2 Build 230824 and newer versions | √ | -- | -- |
| Archer AC1900(US)_V1.6_1.13.2 Build 230824 and newer versions | √ | -- | -- |
Moderator Note:
1. The availability of DoH and/or DoT may vary by region even for the same model. Please check your local website for more information.
2. The above list might not include all models and hardware versions. It is recommended to keep watching the firmware releases for your router, as all the newly supported features will be listed in the patch notes if/when it is added to your version.
3. DoH would not be available when the router works in Access Point mode. Visit this FAQ to know more about the difference between Access Point Mode and Router Mode.
Introduction and Configuration
DoH/DoT Introduction
DoH (DNS over HTTPS) and DoT (DNS over TLS) are two methods that enhance the security and privacy of DNS queries in network communications.
DoH encrypts DNS queries within HTTPS traffic, making them indistinguishable from regular web traffic and difficult to monitor.
DoT uses a dedicated TLS connection for DNS messages, ensuring they are secure from eavesdropping and tampering.
DoH/DoT Configuration
You can go to Advanced > Network > Internet page to enable DoH or DoT.
- For AX and BE series, refer to the screenshots below.
- For AC models, refer to this screenshot:
Note: There are 3 built-in DoH Servers: dns.quad9.net, dns.google, and cloudflare-dns.com, you can choose one at a time.
For more details about the DoH and/or DoT configuration, please refer to How to Configure DoH/DoT on a TP-Link Wireless Router.
Comment below if you have any feedback or run into any issues — we’re here to help.
Related Articles:
Pre-Released Firmware Supports DoH and IoT Network for Archer C80 is Ready for Trial
What is DoH and How to use it on TP-Link Wi-Fi Routers?
How to Configure DoH/DoT on a TP-Link Wireless Router
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Kevin_Z I dont know what caused that error, but i never saw such errors again.
But i have a security related question, As said before, I am using C64 as main router and AX10 v2 & A6 V3 as wired access point mode. If i add all my IoT devices in IoT security - Device Isolation (under security settings of C64), will it work for other two access point too? I mean, if my smart bulb or Alexa is connected to AX10, than will the security protocols implimented on C64 firmware in main router will take same required actions on smart bulb or alexa, which C64 should have taken, if those IoT devices were connected directly to C64 wifi?
Edit: Please also clearify, If i move to easymash (C64 main and get two new router as satelite, eg: C6 V4), than too, will it work or not?
- Copy Link
- Report Inappropriate Content
Seanpatrick wrote
Any upcoming plans to have this released on the Archer AX75E? this is exactly what I wanted to do w/ separate Vlans (which I don't seem to be able to do ATM with the router).
Archer AXE75 doesn't support configuring separate VLANs, but it supports VoIP or IPTV VLAN settings as you can see under Advanced > Network > IPTV/VLAN page:
Regarding the IoT Network, please keep an eye on the router firmware release notes as we don't have an advance notice about that. I will update my thread to add the models to the supported list once there are new models that support IoT Network.
- Copy Link
- Report Inappropriate Content
Gopal2020 wrote
@Kevin_Z I dont know what caused that error, but i never saw such errors again.
But i have a security related question, As said before, I am using C64 as main router and AX10 v2 & A6 V3 as wired access point mode. If i add all my IoT devices in IoT security - Device Isolation (under security settings of C64), will it work for other two access point too? I mean, if my smart bulb or Alexa is connected to AX10, than will the security protocols implimented on C64 firmware in main router will take same required actions on smart bulb or alexa, which C64 should have taken, if those IoT devices were connected directly to C64 wifi?
Edit: Please also clearify, If i move to easymash (C64 main and get two new router as satelite, eg: C6 V4), than too, will it work or not?
@Gopal2020 That should all work.
Just make sure you identify the real MAC address of the smart or IoT devices correctly because some devices will use randomized MAC addresses when connecting to different wireless networks. If the device is using a randomized MAC, you need to re-add it to the Isolated Device List once again when it changes its MAC address.
- Copy Link
- Report Inappropriate Content
Hi,
Could you please ask website admin to update the firmware download link for all the regions for Archer C80, it is always updated on US, not my region which is IN (India).
Also, I do have one request for DOH configuration. I use Cloudflare Zero Trust for managing my current DNS traffic, It gave me custom DOH server which allow me some additional control over all the DNS requests generated from my network. It helps me securing and filtering all my DNS requests. Currently it is not possible to use my own DOH server as I can only select predefined ones, please allow us to use our own custom DOH server.
- Copy Link
- Report Inappropriate Content
iAmSaugata wrote
Hi,
Could you please ask website admin to update the firmware download link for all the regions for Archer C80, it is always updated on US, not my region which is IN (India).
Kevin: Sure. We will report it to the local website admin right now and ask them to publish the latest firmware for Archer C80. Please check the local website later.
Also, I do have one request for DOH configuration. I use Cloudflare Zero Trust for managing my current DNS traffic, It gave me custom DOH server which allow me some additional control over all the DNS requests generated from my network. It helps me securing and filtering all my DNS requests. Currently it is not possible to use my own DOH server as I can only select predefined ones, please allow us to use our own custom DOH server.
Kevin: This will be supported in the future.
- Copy Link
- Report Inappropriate Content
I am looking to get a new router. I have two questions -
- Are there any WiFi 6/6E TPLink router that supports DoH/DoT ?
- Is there any timeframe on availability of using custom DoH/DoT servers like NextDNS?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Kevin_Z Is there any hope for Archer A6 V3 to receive DoH support in the near future?
Also, TP-Link's Indian website is showing US version of firmware (which are outdated) for Archer A6's download page, instead of Indian firmware. So, can you get it corrected? You can check it here- https://www.tp-link.com/in/support/download/archer-a6/v3/#Firmware
- Copy Link
- Report Inappropriate Content
I cannot say for sure when or whether an existing model will receive new firmware that adds support for DoH/DoT. But we will make sure to make that happen as soon as we can and I will update the thread when there are new models supporting it.
Please pay attention to the firmware releases for your models and it's also suggested to subscribe to this thread to get the most updated info.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 5
Views: 29565
Replies: 105
Voters 3
